Eclipse.org|
Eclipse.org |
concrete | Device Kit |
<concrete> element |
Device Kit Attributes Elements XML Reference |
Examples: concrete examples
| Name | Description | Use |
|---|---|---|
| <description> | Description of the concrete device. | 0 to 1 |
| <deprecated> | Specifies that the contents of this element should be marked as deprecated. | 0 to 1 |
| <provider> | Specifies the provider. | 0 to 1 |
| <version> | Specifies the version level. The format of the version number should be n.n.n where n is a number. For example, 1.0.0 is a valid version. | 0 to 1 |
| <vendor> | Specifies an implementing vendor. | 0 to unbounded |
| <incubation> | If the contents of this element is true, then this is an incubation project. | 0 to 1 |
| <spec> | Hardware specification documentation for this concrete device. | 0 to unbounded |
| <specreference> | Specification reference for this concrete device. | 0 to unbounded |
| <multiplex> |  Specifies that this is a multiplex concrete. | 0 to 1 |
| <commandreceived> | Specifies if a command message can be received from the concrete device. | 0 to 1 |
| <initializemeasurements> | Specifies that the concrete device should initialize the measurements. | 0 to 1 |
| <key> | Specifies an optional key value. | 0 to 1 |
| <pids> | Specifies the defined pids. | 0 to unbounded |
| <command> | Defines a command supported by this concrete device. | 0 to unbounded |
| <commands> | Specifies a command group. | 0 to unbounded |
| <group> | Defines a group supported by this concrete device. | 0 to unbounded |
| <measurement> | Defines a measurement supported by this concrete device. | 0 to unbounded |
| <signal> | Defines a signal supported by this concrete device. | 0 to unbounded |
| <exportservice> | Specifies the name of the Open Services Gateway initiative (OSGi) service to be exported. | 0 to unbounded |
| <import> | Specifies the name of a package to be imported. | 0 to unbounded |
| <transport> | Specifies the transport used by the concrete device. | 0 to 1 |
| <transportservice> | Specifies the name of the Open Services Gateway Initiative (OSGi) transport service to be used by the device. | 0 to 1 |
| <udp> | Specifies a User Diagram Protocol (UDP) transport. Please, use the udptransport element instead of the udp element. | 0 to 1 |
| <udptransport> | Specifies a User Diagram Protocol (UDP) transport. | 0 to 1 |
| <bundle> | Specifies an Open Services Gateway Initiative (OSGi) bundle should be created. | 0 to 1 |
| <managedbundle> | Specifies an Open Services Gateway Initiative (OSGi) managed bundle should be created. | 0 to 1 |
| <managedfactorybundle> | Specifies an Open Services Gateway Initiative (OSGi) managed factory bundle should be created. | 0 to 1 |
| Sibling Name | Sibling Description |
|---|---|
| <adapter> | Specifies an adapter. |
| <adaptertest> | Specifies an adapter test. |
| <agent> | Specifies an agent. |
| <agentmodel> | Specifies the agent model used by the agent. |
| <agenttest> | Specifies an agent test. |
| <agentmodeltest> | Specifies an agent model test. |
| <concretetest> | Specifies a concrete test. |
| <connection> | Specifies an connection. |
| <connectiontest> | Specifies an connection test. |
| <device> | Specifies a device. |
| <devicetest> | Specifies a device test. |
| <profile> | Specifies a profile. |
| <profiletest> | Specifies a profile test. |
| <testagent> | Specifies a test agent. |
| <receivertest> | Specifies a receiver transport test. |
| <transport> | Specifies a transport. |
| <transporttest> | Specifies a transport test. |
| <description> | Description of the concrete test. |
| <deprecated> | Specifies that the contents of this element should be marked as deprecated. |
| <provider> | Specifies the provider. |
| <version> | Specifies the version level. The format of the version number should be n.n.n where n is a number. For example, 1.0.0 is a valid version. |
| <vendor> | Specifies an implementing vendor. |
| <incubation> | If the contents of this element is true, then this is an incubation project. |
| <spec> | Hardware specification documentation for this concrete device. |
| <testcount> | Unsigned integer that specifies the number of times to execute tests. |
| <testdelay> | Specifies the milliseconds to sleep between each test. |
| <testexecute> | Specifies if all commands should be executed. |
| <testexecuteread> | Specifies if the executeRead method should be invoked on all measurements. |
| <testexecutewrite> | Specifies if the executeWrite method should be invoked on all measurements. |
| <testread> | Specifies if the read method should be invoked on all measurements. |
| <testtrigger> | Specifies if all signals should be triggered. |
| <junit> | Specifies a junit test. Currently, not supported |
| <monitor> | Specifies a monitor test. Currently, not supported |
| <playback> | Specifies a playback test. Currently, not supported |
| <swt> | Specifies a Standard Widget Toolkit (SWT) user interface concrete test. |
| <testcase> | Specifies a junit testcase. |
| <bundle> | Specifies an Open Services Gateway Initiative (OSGi) bundle should be created. |
| <managedbundle> | Specifies an Open Services Gateway Initiative (OSGi) managed bundle should be created. |
| <managedfactorybundle> | Specifies an Open Services Gateway Initiative (OSGi) managed factory bundle should be created. |
| Element Name | Element Description |
|---|---|
| <dkml> | Specifies the root element of a Device Kit <b>D</b>evice <b>K</b>it <b>L</b>anguage (dkml) document. |
| ¦-<concrete> | Specifies a concrete device. |
| ¦ ¦-<description> | Description of the concrete device. |
| ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated. |
| ¦ ¦-<provider> | Specifies the provider. |
| ¦ ¦-<version> | Specifies the version level. The format of the version number should be n.n.n where n is a number. For example, 1.0.0 is a valid version. |
| ¦ ¦-<vendor> | Specifies an implementing vendor. |
| ¦ ¦-<incubation> | If the contents of this element is true, then this is an incubation project. |
| ¦ ¦-<spec> | Hardware specification documentation for this concrete device. |
| ¦ ¦ ¦-<description> | Description of the specification.(see description) |
| ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦-<speccomment> | Comment about the protocol specification documentation. |
| ¦ ¦ ¦-<specdate> | Date of the protocol specification documentation. |
| ¦ ¦ ¦-<spectitle> | Title of the protoocol specification documentation. |
| ¦ ¦ ¦-<specurl> | Url of the protocol specification documentation. |
| ¦ ¦ ¦-<specvendor> | Vendor of the protocol specification documentation. |
| ¦ ¦ ¦-<specversion> | Version of the protocol specification documentation. |
| ¦ ¦-<specreference> | Specification reference for this concrete device. |
| ¦ ¦ ¦-<description> | Description of the specification reference.(see description) |
| ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦-<spec> | The protocol specification documentation.(see spec) |
| ¦ ¦ ¦-<specsection> | The reference to section in the protocol specification documentation. |
| ¦ ¦-<multiplex> | Specifies that this is a multiplex concrete.
|
| ¦ ¦ ¦-<description> | Description of the multiplex object.(see description) |
| ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦-<specreference> | Specification reference for this multiplex.(see specreference) |
| ¦ ¦-<commandreceived> | Specifies if a command message can be received from the concrete device. |
| ¦ ¦-<initializemeasurements> | Specifies that the concrete device should initialize the measurements. |
| ¦ ¦-<key> | Specifies an optional key value. |
| ¦ ¦-<pids> | Specifies the defined pids. |
| ¦ ¦ ¦-<description> | Specifies the pids description.(see description) |
| ¦ ¦ ¦-<units> | Specifies the pids units. |
| ¦ ¦ ¦ ¦-<description> | Description of the units.(see description) |
| ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦-<specreference> | Specification reference for this units.(see specreference) |
| ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦-<specreference> | Specification reference for pids.(see specreference) |
| ¦ ¦ ¦-<key> | Specifies the unique pids key.(see key) |
| ¦ ¦ ¦-<pid> | Specifies the pid. |
| ¦ ¦ ¦ ¦-<description> | Description of the parameter identifier (PID).(see description) |
| ¦ ¦ ¦ ¦-<units> | Specifies the parameter identifier (PID) units.(see units) |
| ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦-<specreference> | Specification reference for this parameter identifier (PID).(see specreference) |
| ¦ ¦ ¦ ¦-<key> | Specifies the parameter identifier (pid) key.(see key) |
| ¦ ¦ ¦ ¦-<identifier> | Specifies the parameter identifier. |
| ¦ ¦ ¦ ¦-<length> | Specifies the parameter (pid) data length in bits. |
| ¦ ¦ ¦ ¦-<size> | Specifies the parameter identifier (pid) size in bytes. See the length element to specify the parameter (pid) data length in bits. |
| ¦ ¦ ¦ ¦-<minimum> | Specifies the minimum value. |
| ¦ ¦ ¦ ¦-<maximum> | Specifies the maximum value. |
| ¦ ¦ ¦ ¦-<negative> | Negate the parameter value. |
| ¦ ¦ ¦ ¦-<not> | Logical not of a boolean value. |
| ¦ ¦ ¦ ¦-<scale> | Specifies the value to scale the parameter value. |
| ¦ ¦ ¦ ¦ ¦-<description> | Description of the scale.(see description) |
| ¦ ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦ ¦-<specreference> | Specification reference for this scale.(see specreference) |
| ¦ ¦ ¦ ¦-<shift> | Specifies the value to shift the parameter value. |
| ¦ ¦ ¦ ¦ ¦-<description> | Description of the shift.(see description) |
| ¦ ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦ ¦-<specreference> | Specification reference for this shift.(see specreference) |
| ¦ ¦ ¦ ¦-<translate> | Specifies the value to add (translate) to the parameter value. |
| ¦ ¦ ¦ ¦ ¦-<description> | Description of the translate.(see description) |
| ¦ ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦ ¦-<specreference> | Specification reference for this translate.(see specreference) |
| ¦ ¦ ¦ ¦-<units> | Specifies the optional parameter identifier (pid) units.(see units) |
| ¦ ¦-<command> | Defines a command supported by this concrete device. |
| ¦ ¦ ¦-<description> | Specifies the command description.(see description) |
| ¦ ¦ ¦-<optional> | Defines if this command is optional.
|
| ¦ ¦ ¦ ¦-<description> | Description of the optional item.(see description) |
| ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦-<specreference> | Specification reference for this optional item.(see specreference) |
| ¦ ¦ ¦-<units> | Specifies the command data units.(see units) |
| ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦-<specreference> | Specification reference for this command.(see specreference) |
| ¦ ¦ ¦-<key> | Specifies a unique command key.(see key) |
| ¦ ¦ ¦-<configuration> | Defines this command as a configuration command. |
| ¦ ¦ ¦ ¦-<description> | Description of the configuration.(see description) |
| ¦ ¦ ¦ ¦-<units> | Specifies the configuration units.(see units) |
| ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦-<specreference> | Specification reference for this configuration.(see specreference) |
| ¦ ¦ ¦ ¦-<enum> | Specifies a enumeration option configuration.
|
| ¦ ¦ ¦ ¦ ¦-<description> | Description of the enumeration.(see description) |
| ¦ ¦ ¦ ¦ ¦-<units> | Specifies the enum units.(see units) |
| ¦ ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦ ¦-<specreference> | Specification reference for this enumeration.(see specreference) |
| ¦ ¦ ¦ ¦ ¦-<key> | Specifies a enumeration key.(see key) |
| ¦ ¦ ¦ ¦ ¦-<label> | Specifies a enumeration label.
|
| ¦ ¦ ¦ ¦ ¦-<value> | Specifies the enumeration value.
|
| ¦ ¦ ¦ ¦ ¦ ¦-<description> | Description of the value.(see description) |
| ¦ ¦ ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦ ¦ ¦-<specreference> | Specification reference for this value.(see specreference) |
| ¦ ¦ ¦ ¦ ¦ ¦-<boolean> | Specifies a Boolean value. |
| ¦ ¦ ¦ ¦ ¦ ¦-<byte> | Specifies a Byte value (8 bits). |
| ¦ ¦ ¦ ¦ ¦ ¦-<bytes> | Specifies bytes. |
| ¦ ¦ ¦ ¦ ¦ ¦-<character> | Specifies a character value (16 bits). |
| ¦ ¦ ¦ ¦ ¦ ¦-<double> | Specifies a Double value. |
| ¦ ¦ ¦ ¦ ¦ ¦-<float> | Specifies a Float value. |
| ¦ ¦ ¦ ¦ ¦ ¦-<int> | Specifies an Integer value (32 bits). |
| ¦ ¦ ¦ ¦ ¦ ¦-<list> | Specifies list data. |
| ¦ ¦ ¦ ¦ ¦ ¦-<long> | Specifies a Long value (64 bits). |
| ¦ ¦ ¦ ¦ ¦ ¦-<long> | Specifies a Long value (64 bits).(see long) |
| ¦ ¦ ¦ ¦ ¦ ¦-<map> | Specifies a Map value. |
| ¦ ¦ ¦ ¦ ¦ ¦-<short> | Specifies a Short value (16 bits). |
| ¦ ¦ ¦ ¦ ¦ ¦-<string> | Specifies a String value. |
| ¦ ¦ ¦ ¦-<minimum> | Specifies the minimum value.(see minimum) |
| ¦ ¦ ¦ ¦-<maximum> | Specifies the maximum value.(see maximum) |
| ¦ ¦ ¦-<commandreceived> | Specifies if a command message can be received from the device. (see commandreceived) |
| ¦ ¦ ¦-<rate> | Specifies the polling rate in milliseconds. |
| ¦ ¦ ¦-<message> | Specifies the message to execute the command. |
| ¦ ¦ ¦ ¦-<description> | Description of the message.(see description) |
| ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦-<specreference> | Specification reference for this message.(see specreference) |
| ¦ ¦ ¦ ¦-<ascii> | Specifies a set of ASCII characters (8 bits). |
| ¦ ¦ ¦ ¦-<bytes> | Specifies a set of bytes. Each byte is 8 bits.(see bytes) |
| ¦ ¦ ¦ ¦-<nibbles> | Specifies a set of nibbles. Each nibble is 4 bits. |
| ¦ ¦ ¦ ¦-<utf8> | Specifies a set of UTF-8 characters. |
| ¦ ¦ ¦ ¦-<tokens> | Specifies the message tokens. |
| ¦ ¦ ¦ ¦-<parameters> | Specifies a group of parameters. |
| ¦ ¦ ¦ ¦ ¦-<description> | Specifies the parameters description.(see description) |
| ¦ ¦ ¦ ¦ ¦-<units> | Specifies the parameters units.(see units) |
| ¦ ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦ ¦-<specreference> | Specification reference for this group of parameters.(see specreference) |
| ¦ ¦ ¦ ¦ ¦-<key> | Specifies the unique parameters key.(see key) |
| ¦ ¦ ¦ ¦ ¦-<parameters> | Specifies the parameters.(see parameters) |
| ¦ ¦ ¦ ¦-<filter> | Specifies the message filter. |
| ¦ ¦ ¦ ¦ ¦-<description> | Description of the filter.(see description) |
| ¦ ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦ ¦-<specreference> | Specification reference for this filter.(see specreference) |
| ¦ ¦ ¦ ¦ ¦-<bytes> | Specifies the message filter (Bit off - ignore, Bit on - compare).(see bytes) |
| ¦ ¦ ¦ ¦-<sentmessage> | Specifies the message that was sent that caused this message. |
| ¦ ¦ ¦-<method> | Specifies the method to execute the command. |
| ¦ ¦ ¦-<data> | Specifies the data to execute the command. |
| ¦ ¦ ¦ ¦-<description> | Description of the data.(see description) |
| ¦ ¦ ¦ ¦-<optional> | Defines if this data item is optional.(see optional) |
| ¦ ¦ ¦ ¦-<units> | Specifies the data units.(see units) |
| ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦-<specreference> | Specification reference for this data.(see specreference) |
| ¦ ¦ ¦ ¦-<key> | Specifies the data key.(see key) |
| ¦ ¦ ¦ ¦-<length> | Specifies the data length in bits. See the size element to specify the data length in bytes. (see length) |
| ¦ ¦ ¦ ¦-<size> | Specifies the data size in bytes. See the length element to specify the data length in bits. (see size) |
| ¦ ¦ ¦ ¦-<minimum> | Specifies the minimum value.(see minimum) |
| ¦ ¦ ¦ ¦-<maximum> | Specifies the maximum value.(see maximum) |
| ¦ ¦ ¦ ¦-<data> | Specifies the data to execute the command.(see data) |
| ¦ ¦ ¦ ¦-<units> | Specifies the optional data units.(see units) |
| ¦ ¦ ¦-<measurement> | Specifies the measurement to get the value for the command. |
| ¦ ¦-<commands> | Specifies a command group. |
| ¦ ¦ ¦-<description> | Specifies the commands description.(see description) |
| ¦ ¦ ¦-<units> | Specifies the commands units.(see units) |
| ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦-<specreference> | Specification reference for this group of commands.(see specreference) |
| ¦ ¦ ¦-<key> | Specifies a unique commands key.(see key) |
| ¦ ¦ ¦-<configuration> | Defines this command as a configuration command. (see configuration) |
| ¦ ¦ ¦-<commandreceived> | Specifies if a command message can be received from the device. (see commandreceived) |
| ¦ ¦ ¦-<command> | Specifies the command within the group of commands.(see command) |
| ¦ ¦ ¦-<sleep> | Specifies a sleep command. |
| ¦ ¦-<group> | Defines a group supported by this concrete device. |
| ¦ ¦ ¦-<description> | Description of the group.(see description) |
| ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦-<spec> | Hardware specification documentation for this group.(see spec) |
| ¦ ¦ ¦-<specreference> | Specification reference for this group.(see specreference) |
| ¦ ¦ ¦-<commandreceived> | Specifies if a command message can be received from the group. (see commandreceived) |
| ¦ ¦ ¦-<key> | Specifies an optional key value.(see key) |
| ¦ ¦ ¦-<command> | Specifies a command that is supported by this group.(see command) |
| ¦ ¦ ¦-<commands> | Specifies a command group.(see commands) |
| ¦ ¦ ¦-<group> | Specifies a group.(see group) |
| ¦ ¦ ¦-<measurement> | Specifies a measurement supported by this group.(see measurement) |
| ¦ ¦ ¦-<signal> | Specifies a signal supported by this group. |
| ¦ ¦ ¦ ¦-<description> | Specifies the signal description.(see description) |
| ¦ ¦ ¦ ¦-<optional> | Defines if this signal is optional.(see optional) |
| ¦ ¦ ¦ ¦-<units> | Specifies the signal units.(see units) |
| ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦-<specreference> | Specification reference for this signal.(see specreference) |
| ¦ ¦ ¦ ¦-<key> | Specifies the unique signal key.(see key) |
| ¦ ¦ ¦ ¦-<configuration> | Defines this signal as a configuration signal. (see configuration) |
| ¦ ¦ ¦ ¦-<rate> | Specifies the rate that the signal is received in milliseconds.(see rate) |
| ¦ ¦ ¦ ¦-<message> | Specifies the message to trigger the signal.(see message) |
| ¦ ¦ ¦ ¦-<method> | Specifies the method to handle the signal.(see method) |
| ¦ ¦ ¦ ¦-<data> | Specifies the data when the signal triggers.(see data) |
| ¦ ¦ ¦ ¦-<signal> | Specifies the signal to listen. (see signal) |
| ¦ ¦ ¦ ¦-<field> | Specifies the field name to use on the receiving signal. |
| ¦ ¦ ¦ ¦-<messages> | Specifies the messages to trigger the signal. |
| ¦ ¦ ¦ ¦ ¦-<description> | Specifies the messages description.(see description) |
| ¦ ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦ ¦-<specreference> | Specification reference for this group of messages.(see specreference) |
| ¦ ¦ ¦ ¦ ¦-<key> | Specifies the unique messages key.(see key) |
| ¦ ¦ ¦ ¦ ¦-<message> | Specifies the message.(see message) |
| ¦ ¦ ¦ ¦-<pid> | Specifies the pid for this signal.(see pid) |
| ¦ ¦ ¦ ¦-<parameters> | Specifies a parameter group.(see parameters) |
| ¦ ¦ ¦ ¦-<maximum> | Specifies the maximum value.(see maximum) |
| ¦ ¦ ¦ ¦-<minimum> | Specifies the minimum value.(see minimum) |
| ¦ ¦ ¦ ¦-<negative> | Negate the value.(see negative) |
| ¦ ¦ ¦ ¦-<not> | Logical not of a boolean value.(see not) |
| ¦ ¦ ¦ ¦-<scale> | Scale the value.(see scale) |
| ¦ ¦ ¦ ¦-<shift> | Shift the value.(see shift) |
| ¦ ¦ ¦ ¦-<translate> | Translate (add) to the value.(see translate) |
| ¦ ¦ ¦-<exportservice> | Specifies the name of the Open Services Gateway initiative (OSGi) group to be exported. |
| ¦ ¦ ¦-<import> | Specifies the name of the package of be imported. |
| ¦ ¦-<measurement> | Defines a measurement supported by this concrete device.(see measurement) |
| ¦ ¦-<signal> | Defines a signal supported by this concrete device.(see signal) |
| ¦ ¦-<exportservice> | Specifies the name of the Open Services Gateway initiative (OSGi) service to be exported.(see exportservice) |
| ¦ ¦-<import> | Specifies the name of a package to be imported.(see import) |
| ¦ ¦-<transport> | Specifies the transport used by the concrete device. |
| ¦ ¦ ¦-<description> | Description of the transport.(see description) |
| ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦-<provider> | Specifies the provider.(see provider) |
| ¦ ¦ ¦-<version> | Specifies the version level. The format of the version number should be n.n.n where n is a number. For example, 1.0.0 is a valid version.(see version) |
| ¦ ¦ ¦-<vendor> | Specifies an implementing vendor.(see vendor) |
| ¦ ¦ ¦-<incubation> | If the contents of this element is true, then this is an incubation project.(see incubation) |
| ¦ ¦ ¦-<spec> | Hardware specification documentation for this device.(see spec) |
| ¦ ¦ ¦-<specreference> | Specification reference for this transport.(see specreference) |
| ¦ ¦ ¦-<multiplex> | Specifies that this is a multiplex transport.(see multiplex) |
| ¦ ¦ ¦-<customparameter> | Specifies a custom parameter. |
| ¦ ¦ ¦ ¦-<description> | Description of the custom parameter.(see description) |
| ¦ ¦ ¦ ¦-<units> | Specifies the custom parameter units.(see units) |
| ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦-<specreference> | Specification reference for this custom parameter.(see specreference) |
| ¦ ¦ ¦ ¦-<enum> | Specifies a enumeration option configuration.(see enum) |
| ¦ ¦ ¦ ¦-<minimum> | Specifies the minimum value.(see minimum) |
| ¦ ¦ ¦ ¦-<maximum> | Specifies the maximum value.(see maximum) |
| ¦ ¦ ¦-<noactivitytimeout> | No activity timeout value in milliseconds. |
| ¦ ¦ ¦-<responsetimeout> | Response timeout out value in milliseconds. |
| ¦ ¦ ¦-<retrytime> | Retry time value in milliseconds. |
| ¦ ¦ ¦-<transmitretries> | Transmit retries value. |
| ¦ ¦ ¦-<message> | Specifies a transport message.(see message) |
| ¦ ¦ ¦-<exportservice> | Specifies the name of the Open Services Gateway Initiative (OSGi) transport service to be exported.(see exportservice) |
| ¦ ¦ ¦-<import> | Specifies the name of the package to be imported.(see import) |
| ¦ ¦ ¦-<connection> | Specifies an connection to be used by the transport. |
| ¦ ¦ ¦ ¦-<description> | Description of the connection.(see description) |
| ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦-<provider> | Specifies the provider.(see provider) |
| ¦ ¦ ¦ ¦-<version> | Specifies the version level. The format of the version number should be n.n.n where n is a number. For example, 1.0.0 is a valid version.(see version) |
| ¦ ¦ ¦ ¦-<vendor> | Specifies an implementing vendor.(see vendor) |
| ¦ ¦ ¦ ¦-<incubation> | If the contents of this element is true, then this is an incubation project.(see incubation) |
| ¦ ¦ ¦ ¦-<spec> | Hardware specification documentation for this device.(see spec) |
| ¦ ¦ ¦ ¦-<specreference> | Specification reference for this connection.(see specreference) |
| ¦ ¦ ¦ ¦-<multiplex> | Specifies that this is a multiplex connection.(see multiplex) |
| ¦ ¦ ¦ ¦-<customparameter> | Specifies a custom parameter for this connection.(see customparameter) |
| ¦ ¦ ¦ ¦-<bundle> | Specifies an Open Services Gateway Initiative (OSGi) bundle should be created. |
| ¦ ¦ ¦ ¦-<managedbundle> | Specifies an Open Services Gateway Initiative (OSGi) managed bundle should be created. |
| ¦ ¦ ¦ ¦ ¦-<description> | Description of the managed bundle.(see description) |
| ¦ ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦-<managedfactorybundle> | Specifies an Open Services Gateway Initiative (OSGi) managed factory bundle should be created. |
| ¦ ¦ ¦ ¦ ¦-<description> | Description of the factory bundle.(see description) |
| ¦ ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦-<connectionservice> | Specifies the connection to be used by the transport. |
| ¦ ¦ ¦ ¦-<description> | Description of the connection service.(see description) |
| ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦-<specreference> | Specification reference for this connection service.(see specreference) |
| ¦ ¦ ¦-<echo> | Specifies an echo connection. |
| ¦ ¦ ¦-<file> | Specifies a file connection. |
| ¦ ¦ ¦ ¦-<description> | Description of the file connection.(see description) |
| ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦-<specreference> | Specification reference for this file connection.(see specreference) |
| ¦ ¦ ¦ ¦-<multiplex> | Specifies that this is a multiplex file connection.(see multiplex) |
| ¦ ¦ ¦ ¦-<inputpath> | Specifies the file input path name. |
| ¦ ¦ ¦ ¦-<inputname> | Specifies the input file name. |
| ¦ ¦ ¦ ¦-<outputpath> | Specifies the file output path name. |
| ¦ ¦ ¦ ¦-<outputname> | Specifies the output file name. |
| ¦ ¦ ¦-<gpio> | Specifies a General Purpose Input Output (GPIO) connection. |
| ¦ ¦ ¦-<i2c> | Specifies an Inter-IC (I2C) connection. |
| ¦ ¦ ¦-<most> | Specifies a Media Oriented Systems Transport (MOST) connection. |
| ¦ ¦ ¦-<randomaccessfile> | Specifies a random access file connection. |
| ¦ ¦ ¦ ¦-<description> | Description of the random access file connection.(see description) |
| ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦-<specreference> | Specification reference for this random access file connection.(see specreference) |
| ¦ ¦ ¦ ¦-<multiplex> | Specifies that this is a multiplex random access file.(see multiplex) |
| ¦ ¦ ¦ ¦-<name> | Specifies the file name. |
| ¦ ¦ ¦ ¦-<mode> | Specifies the file mode. |
| ¦ ¦ ¦ ¦-<path> | Specifies the file path name. |
| ¦ ¦ ¦-<serial> | Specifies a serial port connection. |
| ¦ ¦ ¦ ¦-<description> | Description of the serial connection.(see description) |
| ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦-<specreference> | Specification reference for this serial connection.(see specreference) |
| ¦ ¦ ¦ ¦-<multiplex> | Specifies that this is a multiplex serial connection.(see multiplex) |
| ¦ ¦ ¦ ¦-<baudrate> | Specifies the serial port baud
rate. Common baud rates for a serial port:
|
| ¦ ¦ ¦ ¦-<comport> | Specifies the serial port communication port. This value starts at 1. |
| ¦ ¦ ¦ ¦-<databits> | Specifies the serial port data bits. |
| ¦ ¦ ¦ ¦-<hardwareflowcontrol> | Specifies the serial port hardware flow control value. |
| ¦ ¦ ¦ ¦-<parity> | Specifies the serial port parity. |
| ¦ ¦ ¦ ¦-<readintervaltimeout> | Specifies the number of milliseconds that the serial port read between bytes. |
| ¦ ¦ ¦ ¦-<readtotaltimeout> | Specifies the maximum amount of time in milliseconds that the serial port will wait for a read. |
| ¦ ¦ ¦ ¦-<softwareflowcontrol> | Specifies the serial port software flow control value. |
| ¦ ¦ ¦ ¦-<stopbits> | Specifies the serial port stop bits. |
| ¦ ¦ ¦ ¦-<writetotaltimeout> | Specifies the serial port write timeout value in milliseconds. |
| ¦ ¦ ¦-<tcpip> | Specifies a Transmission Control Protocol/Internet Protocol (TCP/IP) connection. |
| ¦ ¦ ¦ ¦-<description> | Description of the Transmission Control Protocol/Internet Protocol (TCP/IP) connection.(see description) |
| ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦-<specreference> | Specification reference for this Transmission Control Protocol/Internet Protocol (TCP/IP) connection.(see specreference) |
| ¦ ¦ ¦ ¦-<host> | Specifies the Transmission Control Protocol/Internet Protocol (TCP/IP) remote host name. The "host" element has been replaced with the "remotehost" to be more consistent with the "udp" element. In future versions the "host" element may not be supported so developers should use the "remotehost" element. |
| ¦ ¦ ¦ ¦-<remotehost> | Specifies the Transmission Control Protocol/Internet Protocol (TCP/IP) remote host name. |
| ¦ ¦ ¦ ¦-<remoteport> | Specifies the Transmission Control Protocol/Internet Protocol (TCP/IP) remote port. |
| ¦ ¦ ¦ ¦-<localhost> | Specifies the Transmission Control Protocol/Internet Protocol (TCP/IP) local host. |
| ¦ ¦ ¦ ¦-<localport> | Specifies the Transmission Control Protocol/Internet Protocol (TCP/IP) local port. |
| ¦ ¦ ¦ ¦-<linger> | Specifies the Transmission Control Protocol/Internet Protocol (TCP/IP) linger value. A value of -1 specifies to use the default values. A value of zero specifies no linger. A value greater than zero is the milliseconds linger value. See the Socket class for more details. |
| ¦ ¦ ¦ ¦-<readtimeout> | Specifies the Transmission Control Protocol/Internet Protocol (TCP/IP) read timeout in milliseconds. |
| ¦ ¦ ¦-<tcpipserver> | Specifies a Transmission Control Protocol/Internet Protocol (TCP/IP) server connection. |
| ¦ ¦ ¦ ¦-<description> | Description of the Transmission Control Protocol/Internet Protocol (TCP/IP) server connection.(see description) |
| ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦-<specreference> | Specification reference for this Transmission Control Protocol/Internet Protocol (TCP/IP) server connection.(see specreference) |
| ¦ ¦ ¦ ¦-<multiplex> | Specifies that this is a multiplex TCP/IP server.(see multiplex) |
| ¦ ¦ ¦ ¦-<localhost> | Specifies the Transmission Control Protocol/Internet Protocol (TCP/IP) server local host.(see localhost) |
| ¦ ¦ ¦ ¦-<localport> | Specifies the Transmission Control Protocol/Internet Protocol (TCP/IP) server local port.(see localport) |
| ¦ ¦ ¦ ¦-<port> | Specifies the Transmission Control Protocol/Internet Protocol (TCP/IP) server port. The "port" element has been replaced with the "localport" element to be more constant with "udpserver". Future versions may remove the "port" element so developers should use the "localport" element. |
| ¦ ¦ ¦-<ssl> | Specifies a Transmission Control Protocol/Internet Protocol (TCP/IP) SSL connection. |
| ¦ ¦ ¦ ¦-<description> | Description of the Transmission Control Protocol/Internet Protocol (TCP/IP) SSL connection.(see description) |
| ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦-<specreference> | Specification reference for this Transmission Control Protocol/Internet Protocol (TCP/IP) SSL connection.(see specreference) |
| ¦ ¦ ¦ ¦-<host> | Specifies the Transmission Control Protocol/Internet Protocol (TCP/IP) SSL host name.(see host) |
| ¦ ¦ ¦ ¦-<remoteport> | Specifies the Transmission Control Protocol/Internet Protocol (TCP/IP) SSL remote port.(see remoteport) |
| ¦ ¦ ¦ ¦-<localport> | Specifies the Transmission Control Protocol/Internet Protocol (TCP/IP) SSL local port.(see localport) |
| ¦ ¦ ¦ ¦-<linger> | Specifies the Transmission Control Protocol/Internet Protocol (TCP/IP) SSL linger value. A value of -1 specifies to use the default values. A value of zero speciifes no linger. A value greater than zero is the milliseconds linger value. See the Socket class for more details.(see linger) |
| ¦ ¦ ¦ ¦-<readtimeout> | Specifies the Transmission Control Protocol/Internet Protocol (TCP/IP) SSL read timeout in milliseconds.(see readtimeout) |
| ¦ ¦ ¦-<sslserver> | Specifies a Transmission Control Protocol/Internet Protocol (TCP/IP) SSL server connection. |
| ¦ ¦ ¦ ¦-<description> | Description of the Transmission Control Protocol/Internet Protocol (TCP/IP) SSL server connection.(see description) |
| ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦-<specreference> | Specification reference for this Transmission Control Protocol/Internet Protocol (TCP/IP) SSL server connection.(see specreference) |
| ¦ ¦ ¦ ¦-<multiplex> | Specifies that this is a multiplex SSL TCP/IP server.(see multiplex) |
| ¦ ¦ ¦ ¦-<port> | Specifies the Transmission Control Protocol/Internet Protocol (TCP/IP) SSL port.(see port) |
| ¦ ¦ ¦-<udp> | Specifies a User Diagram Protocol (UDP) connection. |
| ¦ ¦ ¦ ¦-<description> | Description of the User Diagram Protocol (UDP) connection.(see description) |
| ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦-<specreference> | Specification reference for this User Diagram Protocol (UDP) connection.(see specreference) |
| ¦ ¦ ¦ ¦-<multiplex> | Specifies that this is a multiplex UDP connection.(see multiplex) |
| ¦ ¦ ¦ ¦-<remotehost> | Specifies the User Datagram Protocol (UDP) connection remote host name.(see remotehost) |
| ¦ ¦ ¦ ¦-<remoteport> | Specifies the User Datagram Protocol (UDP) connection remote port.(see remoteport) |
| ¦ ¦ ¦ ¦-<localhost> | Specifies the User Datagram Protocol (UDP) connection local host name.(see localhost) |
| ¦ ¦ ¦ ¦-<localport> | Specifies the User Datagram Protocol (UDP) connection local port.(see localport) |
| ¦ ¦ ¦ ¦-<packetsize> | Specifies the User Datagram Protocol (UDP) connection packet size in bytes. |
| ¦ ¦ ¦-<udpserver> | Specifies a User Diagram Protocol (UDP) server connection. |
| ¦ ¦ ¦ ¦-<description> | Description of the User Diagram Protocol (UDP) server connection.(see description) |
| ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦-<specreference> | Specification reference for this User Diagram Protocol (UDP) server connection.(see specreference) |
| ¦ ¦ ¦ ¦-<multiplex> | Specifies that this is a multiplex UDP server connection.(see multiplex) |
| ¦ ¦ ¦ ¦-<remotehost> | Specifies the User Datagram Protocol (UDP) server connection remote host name.(see remotehost) |
| ¦ ¦ ¦ ¦-<remoteport> | Specifies the User Datagram Protocol (UDP) server connection remote port.(see remoteport) |
| ¦ ¦ ¦ ¦-<localhost> | Specifies the User Datagram Protocol (UDP) server connection local host name.(see localhost) |
| ¦ ¦ ¦ ¦-<localport> | Specifies the User Datagram Protocol (UDP) server connection local port.(see localport) |
| ¦ ¦ ¦ ¦-<packetsize> | Specifies the User Datagram Protocol (UDP) server connection packet size in bytes.(see packetsize) |
| ¦ ¦ ¦-<urlconnection> | Specifies a Uniform Resource Locator (URL) connection. |
| ¦ ¦ ¦ ¦-<description> | Description of the Uniform Resource Locator (URL) connection.(see description) |
| ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦-<specreference> | Specification reference for this Uniform Resource Locator (URL) connection.(see specreference) |
| ¦ ¦ ¦ ¦-<url> | Specifies the Uniform Resource Locator (URL) name. |
| ¦ ¦ ¦-<usb> | Specifies a USB connection. |
| ¦ ¦ ¦ ¦-<description> | Description of the USB connection.(see description) |
| ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦ ¦-<specreference> | Specification reference for this USB connection.(see specreference) |
| ¦ ¦ ¦ ¦-<productid> | Specifies the USB product id. |
| ¦ ¦ ¦ ¦-<usage> | Specifies the USB usage. |
| ¦ ¦ ¦ ¦-<usagepage> | Specifies the USB usage page. |
| ¦ ¦ ¦ ¦-<vendorid> | Specifies the USB vendor id. |
| ¦ ¦ ¦-<transportservice> | Specifies the name of the Open Services Gateway Initiative (OSGi) transport service to be used by the transport. |
| ¦ ¦ ¦ ¦-<description> | Description of the Open Services Gateway Initiative (OSGi) transport service.(see description) |
| ¦ ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦-<bundle> | Specifies an Open Services Gateway Initiative (OSGi) bundle should be created.(see bundle) |
| ¦ ¦ ¦-<managedbundle> | Specifies an Open Services Gateway Initiative (OSGi) managed bundle should be created.(see managedbundle) |
| ¦ ¦ ¦-<managedfactorybundle> | Specifies an Open Services Gateway Initiative (OSGi) managed factory bundle should be created.(see managedfactorybundle) |
| ¦ ¦-<transportservice> | Specifies the name of the Open Services Gateway Initiative (OSGi) transport service to be used by the device.(see transportservice) |
| ¦ ¦-<udp> | Specifies a User Diagram Protocol (UDP) transport. Please, use the udptransport element instead of the udp element.(see udp) |
| ¦ ¦-<udptransport> | Specifies a User Diagram Protocol (UDP) transport. |
| ¦ ¦ ¦-<description> | Description of the User Diagram Protocol (UDP) transport.(see description) |
| ¦ ¦ ¦-<deprecated> | Specifies that the contents of this element should be marked as deprecated.(see deprecated) |
| ¦ ¦ ¦-<specreference> | Specification reference for this User Diagram Protocol (UDP) transport.(see specreference) |
| ¦ ¦ ¦-<multiplex> | Specifies that this is a multiplex UDP.(see multiplex) |
| ¦ ¦ ¦-<remotehost> | Specifies the User Datagram Protocol (UDP) remote host name.(see remotehost) |
| ¦ ¦ ¦-<remoteport> | Specifies the User Datagram Protocol (UDP) remote port.(see remoteport) |
| ¦ ¦ ¦-<localhost> | Specifies the User Datagram Protocol (UDP) local host name.(see localhost) |
| ¦ ¦ ¦-<localport> | Specifies the User Datagram Protocol (UDP) local port.(see localport) |
| ¦ ¦ ¦-<packetsize> | Specifies the User Datagram Protocol (UDP) packet size in bytes.(see packetsize) |
| ¦ ¦-<bundle> | Specifies an Open Services Gateway Initiative (OSGi) bundle should be created.(see bundle) |
| ¦ ¦-<managedbundle> | Specifies an Open Services Gateway Initiative (OSGi) managed bundle should be created.(see managedbundle) |
| ¦ ¦-<managedfactorybundle> | Specifies an Open Services Gateway Initiative (OSGi) managed factory bundle should be created.(see managedfactorybundle) |
| ¦-<concretetest> | Specifies a concrete test. |
| ¦ ¦-<concrete> | Specifies the concrete device to be tested.(see concrete) |
| Copyright (c) 2008 IBM. See license in Legal section. | 2008-07-29 | Device Kit XML Reference 1.1.0 |