seu base profile

The seu base profile has key assignments and prefix commands that should be familiar to SEU users. Refer to the updateProfile.baseProfile parameter for other base profiles.

Key Settings

The key settings listed below are divided into key and action pairs. The first string (e.g. "a-b.t") indicates the key and the second string indicates the action (e.g. "blockMarkCharacter"). For a complete definition of how a key is defined refer to the keyAction parameter.

a-b.t	blockMarkCharacter
a-backSpace.t.secondary	undo
a-c.t	blockCopy
a-d.t	blockDelete
a-i.t	blockLowerCase
a-j.t	join
a-k.t	blockUpperCase
a-l.t	blockMarkElement
a-m.t	blockMove
a-pageDown.t	findBlockEnd
a-pageUp.t	findBlockStart
a-q.t	findQuickMark
a-r.t	blockMarkRectangle
a-s.t	split
a-u.t	blockUnmark
a-z.t	blockOverlay
backSpace.t	backSpace
c-a.t	showAll
c-b.t.secondary	nullAction
c-backSpace.t	deleteLine
c-c.t	copy
c-d.t.secondary	nullAction
c-delete.t	truncate
c-e.t.secondary	nullAction
c-end.t	bottom
c-enter.t	openLine
c-f.t.secondary	find
c-g.t.secondary	nullAction
c-h.t.secondary	nullAction
c-home.t	top
c-i.t.secondary	nullAction
c-insert.t.secondary	copy
c-j.t	findLastChange
c-k.t.secondary	nullAction
c-l.t	locateLine
c-left.t	prevWord
c-m.t.secondary	nullAction
c-n.t.secondary	findNext
c-o.t.secondary	nullAction
c-p.t	print
c-pageDown.t.secondary	pageRight
c-pageUp.t.secondary	pageLeft
c-q.t	setQuickMark
c-r.t.secondary	nullAction
c-right.t	nextWord
c-s-a.t.secondary	nullAction
c-s-b.t.secondary	nullAction
c-s-c.t.secondary	nullAction
c-s-d.t.secondary	nullAction
c-s-e.t.secondary	nullAction
c-s-end.t	blockMarkBottom
c-s-f.t.secondary	findAndReplace
c-s-g.t.secondary	nullAction
c-s-h.t.secondary	nullAction
c-s-home.t	blockMarkTop
c-s-i.t.secondary	nullAction
c-s-j.t.secondary	nullAction
c-s-k.t.secondary	nullAction
c-s-l.t.secondary	nullAction
c-s-left.t	blockMarkPrevWord
c-s-m.t.secondary	nullAction
c-s-n.t	compareNext
c-s-o.t.secondary	nullAction
c-s-p.t	comparePrevious
c-s-pageDown.t	blockMarkPageRight
c-s-pageUp.t	blockMarkPageLeft
c-s-q.t.secondary	nullAction
c-s-r.t	compareRefresh
c-s-right.t	blockMarkNextWord
c-s-s.t.secondary	nullAction
c-s-t.t.secondary	nullAction
c-s-u.t.secondary	nullAction
c-s-v.t.secondary	nullAction
c-s-w.t.secondary	nullAction
c-s-x.t.secondary	nullAction
c-s-y.t.secondary	nullAction
c-s-z.t	redo
c-s.t	save
c-t.t.secondary	nullAction
c-u.t	findUp
c-v.t	paste
c-w.t	nullAction
c-x.t	cut
c-y.t	duplicateLine
c-z.t	undo
delete.t	delete
down.t	down
end.t	end
enter.t	splitLine
escape.t	commandLine
f1.t	help
f5.t	clearPrefix
f7.t	pageUp
f8.t	pageDown
home.t	home
insert.t	toggleInsert
left.t	left
pageDown.t.secondary	pageDown
pageUp.t.secondary	pageUp
right.t	right
s-delete.t.secondary	cut
s-down.t	blockMarkDown
s-end.t	blockMarkEnd
s-enter.t	newLine
s-f10.t	popupAtCursor
s-f2.t	find
s-f4.t	findNext
s-f5.t	findAndReplace
s-f7.t	pageLeft
s-f8.t	pageRight
s-home.t	blockMarkHome
s-insert.t.secondary	paste
s-left.t	blockMarkLeft
s-pageDown.t	blockMarkPageDown
s-pageUp.t	blockMarkPageUp
s-right.t	blockMarkRight
s-tab.t	prevTabStop
s-up.t	blockMarkUp
tab.t	insertToTab
up.t	up
a-backSpace.p.secondary	undo
a-d.p	blockDelete
a-i.p	blockLowerCase
a-k.p	blockUpperCase
a-pageDown.p	findBlockEnd
a-pageUp.p	findBlockStart
a-q.p	findQuickMark
a-u.p	blockUnmark
backSpace.p	prefixBackSpace
c-a.p	showAll
c-b.p.secondary	nullAction
c-backSpace.p	deleteLine
c-c.p.secondary	nullAction
c-d.p.secondary	nullAction
c-delete.p	prefixTruncate
c-e.p.secondary	nullAction
c-end.p	bottom
c-enter.p	openLine
c-f.p.secondary	find
c-g.p.secondary	nullAction
c-h.p.secondary	nullAction
c-home.p	top
c-i.p.secondary	nullAction
c-j.p	findLastChange
c-k.p.secondary	nullAction
c-l.p	locateLine
c-m.p.secondary	nullAction
c-n.p.secondary	findNext
c-o.p.secondary	nullAction
c-p.p	print
c-pageDown.p.secondary	pageRight
c-pageUp.p.secondary	pageLeft
c-q.p.secondary	nullAction
c-r.p.secondary	nullAction
c-s-a.p.secondary	nullAction
c-s-b.p.secondary	nullAction
c-s-c.p.secondary	nullAction
c-s-d.p.secondary	nullAction
c-s-e.p.secondary	nullAction
c-s-f.p.secondary	findAndReplace
c-s-g.p.secondary	nullAction
c-s-h.p.secondary	nullAction
c-s-i.p.secondary	nullAction
c-s-j.p.secondary	nullAction
c-s-k.p.secondary	nullAction
c-s-l.p.secondary	nullAction
c-s-m.p.secondary	nullAction
c-s-n.p	compareNext
c-s-o.p.secondary	nullAction
c-s-p.p	comparePrevious
c-s-q.p.secondary	nullAction
c-s-r.p	compareRefresh
c-s-s.p.secondary	nullAction
c-s-t.p.secondary	nullAction
c-s-u.p.secondary	nullAction
c-s-v.p.secondary	nullAction
c-s-w.p.secondary	nullAction
c-s-x.p.secondary	nullAction
c-s-y.p.secondary	nullAction
c-s-z.p	redo
c-s.p	save
c-t.p.secondary	nullAction
c-u.p	findUp
c-v.p.secondary	nullAction
c-w.p.secondary	nullAction
c-x.p	nullAction
c-y.p	duplicateLine
c-z.p	undo
delete.p	prefixDelete
down.p	down
end.p	prefixEnd
enter.p	processPrefix
escape.p	commandLine
f1.p	help
f5.p	clearPrefix
f7.p	pageUp
f8.p	pageDown
home.p.secondary	prefixHome
insert.p	toggleInsert
left.p	prefixLeft
pageDown.p.secondary	pageDown
pageUp.p.secondary	pageUp
right.p	prefixRight
s-f10.p	popupAtCursor
s-f2.p	find
s-f4.p	findNext
s-f5.p	findAndReplace
s-f7.p	pageLeft
s-f8.p	pageRight
s-tab.p	prefixHome
tab.p	home
up.p	up
a-d.c	blockDelete
a-i.c	blockLowerCase
a-k.c	blockUpperCase
a-pageDown.c	findBlockEnd
a-pageUp.c	findBlockStart
a-q.c	findQuickMark
a-u.c	blockUnmark
c-a.c	showAll
c-backSpace.c	deleteLine
c-end.c	bottom
c-enter.c	openLine
c-f.c.secondary	find
c-home.c	top
c-j.c	findLastChange
c-l.c	locateLine
c-n.c.secondary	findNext
c-p.c	print
c-pageDown.c.secondary	pageRight
c-pageUp.c.secondary	pageLeft
c-s.c	save
c-u.c	findUp
f1.c	help
f5.c	clearPrefix
f7.c	pageUp
f8.c	pageDown
pageDown.c.secondary	pageDown
pageUp.c.secondary	pageUp
s-f2.c	find
s-f4.c	findNext
s-f5.c	findAndReplace
s-f7.c	pageLeft
s-f8.c	pageRight

Mouse Event Settings

The mouse event settings listed below are divided into mouse event and action pairs. The first string (e.g. "1-a-c-pressed.1.t") indicates the mouse event and the second string indicates the action (e.g. "blockUnmark"). For a complete definition of how a mouse event is defined refer to the mouseAction parameter.

1-a-c-pressed.1.t	blockUnmark
1-a-c-s-pressed.1.t	blockUnmark
1-a-dragged.t	blockMarkToMouse
1-a-pressed.1.t	cursorToMouse
1-a-pressed.2.t	blockMarkRectangleAtMouse
1-c-dragged.t	blockMarkToMouse
1-c-pressed.1.t	cursorToMouse
1-c-pressed.2.t	blockMarkElementAtMouse
1-dragged.t	blockMarkToMouse
1-pressed.1.t	cursorToMouse
1-pressed.2.t	blockMarkWordAtMouse
1-s-dragged.t	blockMarkToMouse
1-s-pressed.1.t	blockMarkToMouse
2-c-pressed.1.t	blockUnmark
2-c-s-pressed.1.t	blockUnmark
2-dragged.t	blockMarkToMouse
2-pressed.1.t	cursorToMouse
2-pressed.2.t	blockMarkRectangleAtMouse
c-dragged.t	blockMarkToMouse
c-pressed.1.t	cursorToMouse
c-pressed.2.t	blockMarkElementAtMouse
dragged.t	blockMarkToMouse
popup.t	popupAtMouse
pressed.1.t	cursorToMouse
pressed.2.t	blockMarkWordAtMouse
s-dragged.t	blockMarkToMouse
s-pressed.1.t	blockMarkToMouse
1-a-c-pressed.1.p	blockUnmark
1-a-c-s-pressed.1.p	blockUnmark
1-a-dragged.p	blockMarkToMouse
1-a-pressed.1.p	cursorToMouse
1-a-pressed.2.p	blockMarkRectangleAtMouse
1-c-dragged.p	blockMarkToMouse
1-c-pressed.1.p	cursorToMouse
1-c-pressed.2.p	blockMarkElementAtMouse
1-dragged.p	blockMarkToMouse
1-pressed.1.p	cursorToMouse
1-pressed.2.p	blockMarkWordAtMouse
1-s-dragged.p	blockMarkToMouse
1-s-pressed.1.p	blockMarkToMouse
2-c-pressed.1.p	blockUnmark
2-c-s-pressed.1.p	blockUnmark
2-dragged.p	blockMarkToMouse
2-pressed.1.p	cursorToMouse
2-pressed.2.p	blockMarkRectangleAtMouse
c-dragged.p	blockMarkToMouse
c-pressed.1.p	cursorToMouse
c-pressed.2.p	blockMarkElementAtMouse
dragged.p	blockMarkToMouse
popup.p	popupAtMouse
pressed.1.p	cursorToMouse
pressed.2.p	blockMarkWordAtMouse
s-dragged.p	blockMarkToMouse
s-pressed.1.p	blockMarkToMouse
1-a-c-pressed.1.e	blockUnmark
1-a-c-s-pressed.1.e	blockUnmark
1-a-dragged.e	blockMarkToMouse
1-a-pressed.1.e	cursorToMouse
1-a-pressed.2.e	blockMarkRectangleAtMouse
1-c-dragged.e	blockMarkToMouse
1-c-pressed.1.e	cursorToMouse
1-c-pressed.2.e	blockMarkElementAtMouse
1-dragged.e	blockMarkToMouse
1-pressed.1.e	expandHideAtMouse
1-pressed.2.e	expandHideAtMouse
1-pressed.3.e	expandHideAtMouse
1-s-dragged.e	blockMarkToMouse
1-s-pressed.1.e	blockMarkToMouse
2-c-pressed.1.e	blockUnmark
2-c-s-pressed.1.e	blockUnmark
2-dragged.e	blockMarkToMouse
2-pressed.1.e	cursorToMouse
2-pressed.2.e	blockMarkRectangleAtMouse
c-dragged.e	blockMarkToMouse
c-pressed.1.e	cursorToMouse
c-pressed.2.e	blockMarkElementAtMouse
dragged.e	blockMarkToMouse
popup.e	popupAtMouse
pressed.1.e	expandHideAtMouse
pressed.2.e	expandHideAtMouse
pressed.3.e	expandHideAtMouse
s-dragged.e	blockMarkToMouse
s-pressed.1.e	blockMarkToMouse

Prefix Commands

n	Enter n in the prefix area to cause the editor to reposition the cursor on the line with the specified line number. n is a positive integer.
+	Enter + in the prefix area to cause the editor to scroll down one line.
+n	Enter +n in the prefix area to cause the editor to scroll down n lines. n is a positive integer.
-	Enter - in the prefix area to cause the editor to scroll up one line.
-n	Enter -n in the prefix area to cause the editor to scroll up n lines. n is a positive integer.
/	Enter / in the prefix area to make the specified line the current line.
A	Enter A in the prefix area to cause the editor to copy or move lines after the specified line. The source lines and the type of operation (move or copy) are determined by the first occurrence of one of the following commands: C, Cn, CC,CR, CRn, CCR, M, Mn, or MM.
An	Enter An in the prefix area to cause the editor to copy or move lines after the specified line. The source lines and the type of operation (move or copy) are determined by the first occurrence of one of the following commands: C, Cn, CC,CR, CRn, CCR, M, Mn, or MM. n copies of the source will be inserted after the specified line. n is a positive integer.
B	Enter B in the prefix area to cause the editor to copy or move lines before the specified line. The source lines and type of operation (move or copy) are determined by the first occurrence of one of the following commands: C, Cn, CC,CR, CRn, CCR, M, Mn, or MM.
Bn	Enter Bn in the prefix area to cause the editor to copy or move lines before the specified line. The source lines and type of operation (move or copy) are determined by the first occurrence of one of the following commands: C, Cn, CC,CR, CRn, CCR, M, Mn, or MM. n copies of the source will be inserted before the specified line. n is a positive integer.
C	Enter C in the prefix area to indicate that the specified line is to be the source for a copy operation. The target location for the copy is determined by the first occurrence of one of the following: A, An, B, Bn, O, On, OO or OO.
Cn	Enter Cn in the prefix area to indicate that the specified line and the following n - 1 visible lines are to be the source for a copy operation. n is a positive integer. The target location for the copy is determined by the first occurrence of one of the following: A, An, B, Bn, O, On, OO or OO.
CC	Enter CC in the prefix area of two different lines in the document. The CC commands will delimit the source for a copy operation. Only visible lines are included in the source. The target location for the copy is determined by the first occurrence of one of the following: A, An, B, Bn, O, On, OO or OO.
CCR	Enter CCR in the prefix area of two different lines in the document. The CCR commands will delimit the source for a copy operation. Only visible lines are included in the source. The target location for the copy is determined by the first occurrence of one of the following: A, An, B, Bn, O, On, OO or OO. After the copy operation has been completed, the CCR commands are not cleared from the prefix area. They are retained to allow you to specify another target.
CR	Enter CR in the prefix area to indicate that the specified line is to be the source for a copy operation. The target location for the copy is determined by the first occurrence of one of the following: A, An, B, Bn, O, On, OO or OO. After the copy operation has been completed, the CR command is not cleared from the prefix area. It is retained to allow you to specify another target.
CRn	Enter CRn in the prefix area to indicate that the specified line and the following n - 1 visible lines are to be the source for a copy operation. n is a positive integer. The target location for the copy is determined by the first occurrence of one of the following: A, An, B, Bn, O, On, OO or OO. After the copy operation has been completed, the CRn command is not cleared from the prefix area. It is retained to allow you to specify another target.
D	Enter D in the prefix area to cause the editor to delete the specified line.
Dn	Enter Dn in the prefix area to cause the editor to delete the specified line and the following n - 1 visible lines.
DD	Enter DD in the prefix area of two different lines in the document to delimit a block of text that you want deleted. Only the visible lines will be deleted.
I	Enter I in the prefix area to cause the editor to insert a new line after the specified line.
In	Enter In in the prefix area to cause the editor to insert n new lines after the specified line. n is a positive integer.
IS	Enter IS in the prefix area to cause the editor to insert the skeleton line after the specified line. The skeleton line is specified with the S command.
ISn	Enter ISn in the prefix area to cause the editor to insert n copies of the skeleton line after the specified line. The skeleton line is specified with the S command.
L	Enter L in the prefix area to cause the editor to shift the specified line one character to the left. If there is not at least one blank at the start of the line, nothing is done.
Ln	Enter Ln in the prefix area to cause the editor to shift the specified line n characters to the left. If there is are less than n spaces at the start of the line, only the spaces are deleted.
LL	Enter LL in the prefix area of two different lines in the document to delimit a block of text that you want to shift one character to the left. Only the visible lines will be shifted. Lines that do not have at least one space at the start of the line will be unaffected.
LLn	Enter LLn in the prefix area of two different lines in the document to delimit a block of text that you want to shift n characters to the left. Only the visible lines will be shifted. Lines that have less than n spaces at the start of the line will only have those spaces deleted.
LLT	Enter LLT in the prefix area of two different lines in the document to delimit a block of text that you want to shift one character to the left. Only the visible lines will be shifted.
LLTn	Enter LLTn in the prefix area of two different lines in the document to delimit a block of text that you want to shift n characters to the left. Only the visible lines will be shifted.
LP	Enter LP in the prefix area to cause the editor to print the specified line.
LPn	Enter LPn in the prefix area to cause the editor to print the specified line and the following n - 1 visible lines.
LPP	Enter LPP in the prefix area of two different lines in the document to delimit a block of text that you want to print. Only the visible lines will be printed.
LT	Enter LT in the prefix area to cause the editor to shift the specified line one character to the left.
LTn	Enter LTn in the prefix area to cause the editor to shift the specified line n characters to the left.
M	Enter M in the prefix area to indicate that the specified line is to be the source for a move operation. The target location for the move is determined by the first occurrence of one of the following: A, An, B, Bn, O, On, OO or OO.
Mn	Enter Mn in the prefix area to indicate that the specified line and the following n - 1 visible lines are to be the source for a move operation. n is a positive integer. The target location for the move is determined by the first occurrence of one of the following: A, An, B, Bn, O, On, OO or OO.
MM	Enter MM in the prefix area of two different lines in the document. The MM commands will delimit the source for a move operation. Only visible lines are included in the source. The target location for the move is determined by the first occurrence of one of the following: A, An, B, Bn, O, On, OO or OO.
O	Enter O in the prefix area to cause the editor to overlay the specified line. The source lines and the type of operation (move or copy) are determined by the first occurrence of one of the following commands: C, Cn, CC,CR, CRn, CCR, M, Mn, or MM.
On	Enter On in the prefix area to cause the editor to overlay the specified line and the following n - 1 visible lines. The source lines and the type of operation (move or copy) are determined by the first occurrence of one of the following commands: C, Cn, CC,CR, CRn, CCR, M, Mn, or MM.
OO	Enter OO in the prefix area of two different lines in the document. The OO commands will delimit the overlay target for a move or copy operation. Only the visible lines will be overlaid. The source lines and the type of operation (move or copy) are determined by the first occurrence of one of the following commands: C, Cn, CC,CR, CRn, CCR, M, Mn, or MM.
R	Enter R in the prefix area to cause the editor to shift the specified line one character to the right. If the line cannot be shifted without truncating a non blank character, nothing is done.
Rn	Enter Rn in the prefix area to cause the editor to shift the specified line n characters to the right. If the line cannot be shifted n characters without truncating a non blank character, the line will only be shifted as far to the right as it can be without truncating a non blank character.
RP	Enter RP in the prefix area to cause the editor to duplicate the specified line.
RPn	Enter RPn in the prefix area to cause the editor to duplicate the specified line n times.
RPP	Enter RPP in the prefix area of two different lines in the document. The RPP commands will delimit a block of text that you want duplicated. Only the visible lines will be duplicated.
RPPn	Enter RPPn in the prefix area of two different lines in the document. The RPPn commands will delimit a block of text that you want duplicated n times. Only the visible lines will be duplicated.
RR	Enter RR in the prefix area of two different lines in the document to delimit a block of text that you want to shift one character to the right. Only the visible lines will be shifted. Lines that cannot be shifted without truncating a non blank character will be unaffected.
RRn	Enter RRn in the prefix area of two different lines in the document to delimit a block of text that you want to shift n characters to the right. Only the visible lines will be shifted. Lines that cannot be shifted without truncating a non blank character will only be shifted as far to the right as they can be without truncating a non blank character.
RRT	Enter RRT in the prefix area of two different lines in the document to delimit a block of text that you want to shift one character to the right. Only the visible lines will be shifted.
RRTn	Enter RRTn in the prefix area of two different lines in the document to delimit a block of text that you want to shift n characters to the right. Only the visible lines will be shifted.
RT	Enter RT in the prefix area to cause the editor to shift the specified line one character to the right.
RTn	Enter RTn in the prefix area to cause the editor to shift the specified line n characters to the right.
S	Enter S in the prefix area to cause the specified line to be saved as the skeleton line. The skeleton line is used by the IS and ISn commands.
SF	Enter SF in the prefix area of an excluded block header to show the first line in the excluded block. Lines can be excluded with the X, Xn and XX commands.
SFn	Enter SFn in the prefix area of an excluded block header to show the first n lines in the excluded block. Lines can be excluded with the X, Xn and XX commands.
SL	Enter SL in the prefix area of an excluded block header to show the last line in the excluded block. Lines can be excluded with the X, Xn and XX commands.
SLn	Enter SLn in the prefix area of an excluded block header to show the last n lines in the excluded block. Lines can be excluded with the X, Xn and XX commands.
W	Enter W in the prefix area to cause the editor to scroll the text area so that column 1 is visible.
Wn	Enter Wn in the prefix area to cause the editor to scroll the text area so that column n is the first visible column on the left.
X	Enter X in the prefix area to cause the editor to exclude the specified line. The line can be reshown with the SF, SFn, SL, or SLn commands.
Xn	Enter Xn in the prefix area to cause the editor to exclude the specified line and the following n - 1 visible lines. The lines can be reshown with the SF, SFn, SL, or SLn commands.
XX	Enter XX in the prefix area of two different lines in the document to delimit a block of text that you want to exclude. The lines can be reshown with the SF, SFn, SL, or SLn commands.

Editor commands and parameters

Default editor commands
processPrefix command
Editor parameters
keyAction parameter
mouseAction parameter
updateProfile.baseProfile parameter