A B C D E F G H I J K L M N O P R S T U V W X Z

S

save() - Method in class org.eclipse.gef.ui.palette.customize.PaletteCustomizerDialog

This method is invoked when the changes made since the last save need to be saved.

save() - Method in class org.eclipse.gef.ui.palette.PaletteCustomizer

Persists the changes made to the model.

SaveAction - Class in org.eclipse.gef.ui.actions

An action to save the editor's current state.

SaveAction(IEditorPart) - Constructor for class org.eclipse.gef.ui.actions.SaveAction

Constructs a SaveAction and associates it with the given editor.

saveOriginalConstraint() - Method in class org.eclipse.gef.editpolicies.BendpointEditPolicy

Since the original figure is used for feedback, this method saves the original constraint, so that is can be restored when the feedback is erased.

saveState(IMemento) - Method in class org.eclipse.gef.ui.palette.PaletteViewer

Captures the state of the contents of this viewer in the given memento

SCALABLE_LAYERS - Static variable in interface org.eclipse.gef.LayerConstants

The layer that contains all scaled layers.

ScalableFreeformRootEditPart - Class in org.eclipse.gef.editparts

Adds Zoom support to the standard FreeformGraphicalRootEditPart.

ScalableFreeformRootEditPart() - Constructor for class org.eclipse.gef.editparts.ScalableFreeformRootEditPart

Constructor for ScalableFreeformRootEditPart

ScalableRootEditPart - Class in org.eclipse.gef.editparts

A graphical root composed of regular Layers.

ScalableRootEditPart() - Constructor for class org.eclipse.gef.editparts.ScalableRootEditPart

Constructor for ScalableFreeformRootEditPart

SCALED_FEEDBACK_LAYER - Static variable in interface org.eclipse.gef.LayerConstants

The layer containing scaled feedback.

ScrollableSelectionFeedbackEditPolicy - Class in org.eclipse.gef.editpolicies

A SelectionEditPolicy, which may be registered to an IScrollableEditPart to provide primary selection feedback by rendering the hidden contents of the host figure's ScrollPane's nested Viewport by means of GhostImageFigures.

ScrollableSelectionFeedbackEditPolicy() - Constructor for class org.eclipse.gef.editpolicies.ScrollableSelectionFeedbackEditPolicy

ScrollingGraphicalViewer - Class in org.eclipse.gef.ui.parts

A Graphical Viewer implementation which uses a FigureCanvas for native scrolling.

ScrollingGraphicalViewer() - Constructor for class org.eclipse.gef.ui.parts.ScrollingGraphicalViewer

Constructs a ScrollingGraphicalViewer;

select(EditPart) - Method in interface org.eclipse.gef.EditPartViewer

Replaces the current selection with the specified EditPart.

select(EditPart) - Method in class org.eclipse.gef.ui.parts.AbstractEditPartViewer

SelectAllAction - Class in org.eclipse.gef.ui.actions

An action which selects all edit parts in the active workbench part.

SelectAllAction(IWorkbenchPart) - Constructor for class org.eclipse.gef.ui.actions.SelectAllAction

Constructs a SelectAllAction and associates it with the given part.

SELECTED - Static variable in interface org.eclipse.gef.EditPart

Used to indicate non-primary selection

SELECTED_NONE - Static variable in interface org.eclipse.gef.EditPart

Used to indicate no selection

SELECTED_PRIMARY - Static variable in interface org.eclipse.gef.EditPart

Used to indicate primary selection, or "Anchor" selection.

SelectEditPartTracker - Class in org.eclipse.gef.tools

DragTracker used to select, edit, and open EditParts.

SelectEditPartTracker(EditPart) - Constructor for class org.eclipse.gef.tools.SelectEditPartTracker

Constructs a new SelectEditPartTracker with the given edit part as the source.

selectedStateChanged(EditPart) - Method in interface org.eclipse.gef.EditPartListener

Called when the selected state of an EditPart has changed.

selectedStateChanged(EditPart) - Method in class org.eclipse.gef.EditPartListener.Stub

selection - Variable in class org.eclipse.gef.ui.parts.AbstractEditPartViewer

The raw list of selected editparts.

SELECTION_FEEDBACK_ROLE - Static variable in interface org.eclipse.gef.EditPolicy

The key used to install a selection feedback EditPolicy.

SelectionAction - Class in org.eclipse.gef.ui.actions

Superclass for an action needing the current selection.

SelectionAction(IWorkbenchPart, int) - Constructor for class org.eclipse.gef.ui.actions.SelectionAction

Creates a SelectionAction and associates it with the given editor.

SelectionAction(IWorkbenchPart) - Constructor for class org.eclipse.gef.ui.actions.SelectionAction

Creates a SelectionAction and associates it with the given workbench part.

selectionChanged(SelectionChangedEvent) - Method in class org.eclipse.gef.ui.actions.CopyTemplateAction

Sets the selected EditPart and refreshes the enabled state of this action.

selectionChanged(IWorkbenchPart, ISelection) - Method in class org.eclipse.gef.ui.parts.GraphicalEditor

selectionChanged(SelectionChangedEvent) - Method in class org.eclipse.gef.ui.parts.SelectionSynchronizer

Receives notification from one viewer, and maps selection to all other members.

SelectionEditPolicy - Class in org.eclipse.gef.editpolicies

A GraphicalEditPolicy that is sensitive to the host's selection.

SelectionEditPolicy() - Constructor for class org.eclipse.gef.editpolicies.SelectionEditPolicy

SelectionHandlesEditPolicy - Class in org.eclipse.gef.editpolicies

A SelectionEditPolicy which manages a List of handles provided by the subclass.

SelectionHandlesEditPolicy() - Constructor for class org.eclipse.gef.editpolicies.SelectionHandlesEditPolicy

selectionListeners - Variable in class org.eclipse.gef.ui.parts.AbstractEditPartViewer

Deprecated.

SelectionManager - Class in org.eclipse.gef

Manages a viewer's selection model.

SelectionManager() - Constructor for class org.eclipse.gef.SelectionManager

Default Constructor

SelectionRequest - Class in org.eclipse.gef.requests

A request to select an edit part.

SelectionRequest() - Constructor for class org.eclipse.gef.requests.SelectionRequest

SelectionSynchronizer - Class in org.eclipse.gef.ui.parts

A utility for synchronizing the selection of multiple EditPartViewers.

SelectionSynchronizer() - Constructor for class org.eclipse.gef.ui.parts.SelectionSynchronizer

SelectionTool - Class in org.eclipse.gef.tools

Tool to select and manipulate figures.

SelectionTool() - Constructor for class org.eclipse.gef.tools.SelectionTool

Default constructor.

SelectionToolEntry - Class in org.eclipse.gef.palette

A ToolEntry for a SelectionTool.

SelectionToolEntry() - Constructor for class org.eclipse.gef.palette.SelectionToolEntry

Creates a new SelectionToolEntry.

SelectionToolEntry(String) - Constructor for class org.eclipse.gef.palette.SelectionToolEntry

Constructor for SelectionToolEntry.

SelectionToolEntry(String, String) - Constructor for class org.eclipse.gef.palette.SelectionToolEntry

Constructor for SelectionToolEntry.

setActionBars(IActionBars) - Method in class org.eclipse.gef.ui.properties.UndoablePropertySheetPage

Overwritten to register global action handlers for undo and redo.

setActionRegistry(ActionRegistry) - Method in class org.eclipse.gef.ui.parts.GraphicalEditor

Sets the ActionRegistry for this EditorPart.

setActiveEditor(IEditorPart) - Method in class org.eclipse.gef.ui.actions.ActionBarContributor

setActiveEntry(PaletteEntry) - Method in class org.eclipse.gef.palette.PaletteStack

Sets the "active" child entry to the given PaletteEntry.

setActiveEntry(PaletteEntry) - Method in class org.eclipse.gef.ui.palette.customize.PaletteCustomizerDialog

This methods sets the active entry.

setActiveEntryPage(EntryPage) - Method in class org.eclipse.gef.ui.palette.customize.PaletteCustomizerDialog

Sets the given EntryPage as the top page in the PageBook that shows the properties of the item selected in the Outline.

SetActivePaletteToolAction - Class in org.eclipse.gef.ui.actions

This action sets a Tool to be the active entry in the PaletteViewer.

SetActivePaletteToolAction(PaletteViewer, String, ImageDescriptor, boolean, ToolEntry) - Constructor for class org.eclipse.gef.ui.actions.SetActivePaletteToolAction

Creates a new SetActivePaletteToolAction with the given entry to set, as well as a label, icon, and isChecked to be used in a menu.

setActiveTool(Tool) - Method in class org.eclipse.gef.EditDomain

Sets the active Tool for this EditDomain.

setActiveTool(ToolEntry) - Method in class org.eclipse.gef.ui.palette.PaletteViewer

Sets the active entry for this palette.

setAlignment(int) - Method in class org.eclipse.gef.requests.AlignmentRequest

Sets the alignment.

setAlignmentRectangle(Rectangle) - Method in class org.eclipse.gef.requests.AlignmentRequest

Sets the alignment rectangle.

setAlpha(int) - Method in class org.eclipse.gef.editpolicies.ScrollableSelectionFeedbackEditPolicy

Used to specify the alpha value used for all feedback figures.

setAnchor(ConnectionAnchor) - Method in class org.eclipse.gef.editpolicies.FeedbackHelper

Sets the anchor for the end being moved.

setAutoCollapseSetting(int) - Method in class org.eclipse.gef.ui.palette.DefaultPaletteViewerPreferences

setAutoCollapseSetting(int) - Method in interface org.eclipse.gef.ui.palette.PaletteViewerPreferences

Sets the auto-collapse setting.

setAutoexposeHelper(AutoexposeHelper) - Method in class org.eclipse.gef.dnd.AbstractTransferDropTargetListener

Sets the current autoexpose helper.

setAutoexposeHelper(AutoexposeHelper) - Method in class org.eclipse.gef.tools.DragEditPartsTracker

setAutoexposeHelper(AutoexposeHelper) - Method in class org.eclipse.gef.tools.TargetingTool

Sets the active autoexpose helper to the given helper, or null.

setBounds(Rectangle) - Method in class org.eclipse.gef.editparts.GuideLayer

setCapture(IFigure) - Method in class org.eclipse.gef.ui.parts.DomainEventDispatcher

setCellEditor(CellEditor) - Method in class org.eclipse.gef.requests.DirectEditRequest

Sets the cell editor to be used when direct editing.

setCellEditor(CellEditor) - Method in class org.eclipse.gef.tools.DirectEditManager

Sets the cell editor to the given editor.

setCenteredResize(boolean) - Method in class org.eclipse.gef.requests.ChangeBoundsRequest

Used to set whether a centered resize is being performed.

setChildren(List) - Method in class org.eclipse.gef.palette.PaletteContainer

Sets the children of this PaletteContainer to the given list of PaletteEntry objects.

setChildren(List) - Method in class org.eclipse.gef.palette.PaletteStack

setCloneActive(boolean) - Method in class org.eclipse.gef.tools.DragEditPartsTracker

Enables cloning if the value is true.

setCommandName(String) - Method in class org.eclipse.gef.tools.ConnectionEndpointTracker

Sets the command name.

setCommandStack(CommandStack) - Method in class org.eclipse.gef.EditDomain

Sets the CommandStack.

setConnection(Connection) - Method in class org.eclipse.gef.editpolicies.FeedbackHelper

Sets the connection.

setConnectionEditPart(ConnectionEditPart) - Method in class org.eclipse.gef.requests.ReconnectRequest

Sets the ConnectionEditPart to be reconnected.

setConnectionEditPart(ConnectionEditPart) - Method in class org.eclipse.gef.tools.ConnectionBendpointTracker

Sets the connection editpart being operated on.

setConnectionEditPart(ConnectionEditPart) - Method in class org.eclipse.gef.tools.ConnectionEndpointTracker

Sets the connection edit part that is being reconnected.

setConnectionSource(EditPart) - Method in class org.eclipse.gef.tools.AbstractConnectionCreationTool

Sets the source editpart for the creation

setConsole(Text) - Static method in class org.eclipse.gef.GEF

Deprecated. Sets a text control to be used as a console.

setConstrainedMove(boolean) - Method in class org.eclipse.gef.requests.ChangeBoundsRequest

Used to set whether a constrained move is being performed.

setConstrainedResize(boolean) - Method in class org.eclipse.gef.requests.ChangeBoundsRequest

Used to set whether a constrained resize is being performed.

setConstraint(IFigure, Object) - Method in class org.eclipse.gef.editparts.GuideLayer

The constraint is expected to be a Boolean indicating whether the given guide line figure is horizontal or not.

setContents(EditPart) - Method in class org.eclipse.gef.editparts.GraphicalRootEditPart

Deprecated.

setContents(EditPart) - Method in class org.eclipse.gef.editparts.RootTreeEditPart

setContents(EditPart) - Method in class org.eclipse.gef.editparts.SimpleRootEditPart

setContents(EditPart) - Method in interface org.eclipse.gef.EditPartViewer

Sets the contents for this Viewer.

setContents(Object) - Method in interface org.eclipse.gef.EditPartViewer

Creates an EditPart for the provided model object using the EditPartFactory.

setContents(EditPart) - Method in interface org.eclipse.gef.RootEditPart

Sets the contents EditPart.

setContents(Object) - Method in class org.eclipse.gef.ui.actions.Clipboard

Sets the contents of the clipboard.

setContents(EditPart) - Method in class org.eclipse.gef.ui.parts.AbstractEditPartViewer

setContents(Object) - Method in class org.eclipse.gef.ui.parts.AbstractEditPartViewer

setContextMenu(MenuManager) - Method in interface org.eclipse.gef.EditPartViewer

Sets the context MenuManager for this viewer.

setContextMenu(MenuManager) - Method in class org.eclipse.gef.ui.parts.AbstractEditPartViewer

setContextMenu(MenuManager) - Method in class org.eclipse.gef.ui.parts.GraphicalViewerImpl

Extended implementation to flush the viewer as the context menu is shown.

setControl(Control) - Method in interface org.eclipse.gef.EditPartViewer

Sets the Control for this viewer.

setControl(Control) - Method in class org.eclipse.gef.ui.parts.AbstractEditPartViewer

setCurrentCommand(Command) - Method in class org.eclipse.gef.tools.AbstractTool

Used to cache a command obtained from AbstractTool.getCommand().

setCurrentEvent(DropTargetEvent) - Method in class org.eclipse.gef.dnd.AbstractTransferDropTargetListener

Sets the current DropTargetEvent.

setCurrentUseLargeIcons(boolean) - Method in class org.eclipse.gef.ui.palette.DefaultPaletteViewerPreferences

setCurrentUseLargeIcons(boolean) - Method in interface org.eclipse.gef.ui.palette.PaletteViewerPreferences

Sets the "Use Large Icons" option for the currently active layout.

setCursor(Cursor) - Method in interface org.eclipse.gef.EditPartViewer

Sets the cursor for the viewer's Control.

setCursor(Cursor) - Method in class org.eclipse.gef.tools.AbstractTool

Shows the given cursor on the current viewer.

setCursor(Cursor) - Method in class org.eclipse.gef.ui.parts.AbstractEditPartViewer

setCursor(Cursor) - Method in class org.eclipse.gef.ui.parts.DomainEventDispatcher

setCursor(Cursor) - Method in class org.eclipse.gef.ui.parts.GraphicalViewerImpl

setCustomizer(PaletteCustomizer) - Method in class org.eclipse.gef.ui.palette.PaletteViewer

Sets the customizer.

setDebugLabel(String) - Method in class org.eclipse.gef.commands.Command

Sets the debug label for this command

setDefaultCursor(Cursor) - Method in class org.eclipse.gef.tools.AbstractTool

Sets the default cursor.

setDefaultEntry(ToolEntry) - Method in class org.eclipse.gef.palette.PaletteRoot

Sets the default entry to the passed value.

setDefaultSelection(PaletteEntry) - Method in class org.eclipse.gef.ui.palette.customize.PaletteCustomizerDialog

Sets the given PaletteEntry as the one to be selected when the dialog opens.

setDefaultTool(Tool) - Method in class org.eclipse.gef.EditDomain

Sets the default Tool, which is used if the Palette does not provide a default

setDescription(String) - Method in class org.eclipse.gef.palette.PaletteEntry

Mutator method for description

setDirectEditFeature(Object) - Method in class org.eclipse.gef.requests.DirectEditRequest

Sets the direct edit feature.

setDirectEditRequest(Request) - Method in class org.eclipse.gef.ui.actions.DirectEditAction

Clients may override the request that is used to perform the direct edit.

setDirty(boolean) - Method in class org.eclipse.gef.tools.DirectEditManager

Sets the dirty property.

setDisabledCursor(Cursor) - Method in class org.eclipse.gef.tools.AbstractTool

Sets the disabled cursor.

setDockLocation(int) - Method in interface org.eclipse.gef.ui.palette.FlyoutPaletteComposite.FlyoutPreferences

This method is invoked when the flyout palette's dock location is changed.

setDragAllowed(boolean) - Method in class org.eclipse.gef.editpolicies.NonResizableEditPolicy

Sets the dragability of the EditPolicy to the given value.

setDragCursor(Cursor) - Method in class org.eclipse.gef.handles.AbstractHandle

Deprecated. use setCursor()

setDragSource(DragSource) - Method in class org.eclipse.gef.ui.parts.AbstractEditPartViewer

Sets the drag source.

setDragSource(DragSource) - Method in class org.eclipse.gef.ui.parts.GraphicalViewerImpl

Extends the drag source to handle figures which handle MouseDown events, thereby aborting any DragDetect callbacks.

setDragTracker(DragTracker) - Method in class org.eclipse.gef.handles.AbstractHandle

Sets the drag tracker for this handle.

setDragTracker(DragTracker) - Method in class org.eclipse.gef.tools.SelectionTool

Sets the drag tracker for this SelectionTool.

setDrawerType(Object) - Method in class org.eclipse.gef.palette.PaletteDrawer

DrawerType indicates whether a drawer will contain ToolEntries of PaletteTemplateEntries.

setDropTarget(DropTarget) - Method in class org.eclipse.gef.ui.parts.AbstractEditPartViewer

Sets the drop target.

setEditDomain(EditDomain) - Method in interface org.eclipse.gef.EditPartViewer

Sets the EditDomain for this viewer.

setEditDomain(EditDomain) - Method in interface org.eclipse.gef.Tool

Called to set the EditDomain for this Tool.

setEditDomain(EditDomain) - Method in class org.eclipse.gef.tools.AbstractTool

Sets the EditDomain.

setEditDomain(EditDomain) - Method in class org.eclipse.gef.ui.parts.AbstractEditPartViewer

setEditDomain(DefaultEditDomain) - Method in class org.eclipse.gef.ui.parts.GraphicalEditor

Sets the EditDomain for this EditorPart.

setEditDomain(DefaultEditDomain) - Method in class org.eclipse.gef.ui.parts.GraphicalEditorWithFlyoutPalette

Sets the edit domain for this editor.

setEditDomain(DefaultEditDomain) - Method in class org.eclipse.gef.ui.parts.GraphicalEditorWithPalette

Sets the palette root of the edit domain

setEditDomain(EditDomain) - Method in class org.eclipse.gef.ui.parts.GraphicalViewerImpl

setEditorPart(IEditorPart) - Method in class org.eclipse.gef.DefaultEditDomain

Sets the IEditorPart for this EditDomain.

setEditorPart(IEditorPart) - Method in class org.eclipse.gef.ui.actions.EditorPartAction

Sets the editor.

setEditPart(GraphicalEditPart) - Method in class org.eclipse.gef.tools.DirectEditManager

Sets the source edit part.

setEditPartFactory(EditPartFactory) - Method in interface org.eclipse.gef.EditPartViewer

Sets the EditPartFactory.

setEditPartFactory(EditPartFactory) - Method in class org.eclipse.gef.ui.parts.AbstractEditPartViewer

setEditParts(List) - Method in class org.eclipse.gef.requests.GroupRequest

Sets the EditParts making this Request to the given List.

setEditParts(EditPart) - Method in class org.eclipse.gef.requests.GroupRequest

A helper method to set the given EditPart as the requester.

setEnabled(boolean) - Method in class org.eclipse.gef.ui.parts.SelectionSynchronizer

Enables or disabled synchronization between viewers.

setEnablementDeterminedByCommand(boolean) - Method in class org.eclipse.gef.dnd.AbstractTransferDropTargetListener

Determines if the target editpart should be asked for a Command during AbstractTransferDropTargetListener.isEnabled(DropTargetEvent).

setExtendedData(Map) - Method in class org.eclipse.gef.Request

Sets the given map to be the new extended data (by reference) for this request.

setExternalViewer(PaletteViewer) - Method in class org.eclipse.gef.ui.palette.FlyoutPaletteComposite

If an external palette viewer is provided, palette state (that is captured in PaletteViewer.saveState(IMemento) -- active tool, drawer expansion state, drawer pin state, etc.) will be maintained when switching between the two viewers.

setFactory(CreationFactory) - Method in class org.eclipse.gef.requests.CreateRequest

Sets the factory to be used when creating the new object.

setFactory(CreationFactory) - Method in class org.eclipse.gef.tools.AbstractConnectionCreationTool

Sets the creation factory used in the request.

setFactory(CreationFactory) - Method in class org.eclipse.gef.tools.CreationTool

Sets the creation factory used to create the new edit parts.

setFigure(IFigure) - Method in class org.eclipse.gef.editparts.AbstractGraphicalEditPart

Sets the Figure

setFixed(boolean) - Method in class org.eclipse.gef.handles.ConnectionHandle

Sets whether the handle is fixed and cannot be moved

setFlag(int, boolean) - Method in class org.eclipse.gef.editparts.AbstractEditPart

Sets the value of the specified flag.

setFlag(int, boolean) - Method in class org.eclipse.gef.util.FlagSupport

Sets the flag (or all of the flags) indicated by the given bitmask to the given value.

setFocus(boolean) - Method in interface org.eclipse.gef.EditPart

Set the focus property to reflect the value in the EditPartViewer.

setFocus(boolean) - Method in class org.eclipse.gef.editparts.AbstractEditPart

Called by EditPartViewer to indicate that the EditPart has gained or lost keyboard focus.

setFocus(EditPart) - Method in interface org.eclipse.gef.EditPartViewer

Sets the focus EditPart.

setFocus(boolean) - Method in class org.eclipse.gef.editpolicies.SelectionEditPolicy

Sets the internal focus value.

setFocus(EditPart) - Method in class org.eclipse.gef.SelectionManager

Sets the focus part.

setFocus(EditPart) - Method in class org.eclipse.gef.ui.parts.AbstractEditPartViewer

setFocus() - Method in class org.eclipse.gef.ui.parts.ContentOutlinePage

Sets focus to a part in the page.

setFocus() - Method in class org.eclipse.gef.ui.parts.GraphicalEditor

setFocus() - Method in class org.eclipse.gef.ui.views.palette.PaletteViewerPage

Sets focus on the palette's control

setFontData(FontData) - Method in class org.eclipse.gef.ui.palette.DefaultPaletteViewerPreferences

setFontData(FontData) - Method in interface org.eclipse.gef.ui.palette.PaletteViewerPreferences

Sets the FontData for the palette.

setGraphicalControl(Control) - Method in class org.eclipse.gef.ui.palette.FlyoutPaletteComposite

Sets the control along the side of which the palette is to be displayed.

setGraphicalViewer(GraphicalViewer) - Method in class org.eclipse.gef.ui.parts.GraphicalEditor

Sets the graphicalViewer for this EditorPart.

setGraphicalViewer(ScrollingGraphicalViewer) - Method in class org.eclipse.gef.ui.rulers.RulerComposite

Creates rulers for the given graphical viewer.

setHost(EditPart) - Method in class org.eclipse.gef.editpolicies.AbstractEditPolicy

setHost(EditPart) - Method in class org.eclipse.gef.editpolicies.ScrollableSelectionFeedbackEditPolicy

setHost(EditPart) - Method in interface org.eclipse.gef.EditPolicy

Sets the host in which this EditPolicy is installed.

setHoverActive(boolean) - Method in class org.eclipse.gef.tools.AbstractTool

Sets whether the hover flag is true or false.

setId(String) - Method in class org.eclipse.gef.palette.PaletteEntry

Sets the id.

setImageDescriptor(ImageDescriptor) - Method in class org.eclipse.gef.ui.palette.customize.PaletteCustomizationAction

setImageDescriptor(ImageDescriptor) - Method in class org.eclipse.gef.ui.palette.customize.PaletteEntryFactory

Sets the ImageDescriptor used to create the image to represent this factory

setIndex(int) - Method in class org.eclipse.gef.handles.BendpointHandle

Sets the index.

setIndex(int) - Method in class org.eclipse.gef.requests.BendpointRequest

Sets the index of the bendpoint to be changed.

setIndex(int) - Method in class org.eclipse.gef.tools.ConnectionBendpointTracker

Sets the index of the operation.

setInitialState(int) - Method in class org.eclipse.gef.palette.PaletteDrawer

Sets the initial state of this drawer (i.e. the state that this drawer should be when the palette is created).

setInput(KeyEvent) - Method in class org.eclipse.gef.tools.AbstractTool.Input

Sets the keyboard input based on the KeyEvent.

setInput(MouseEvent) - Method in class org.eclipse.gef.tools.AbstractTool.Input

Sets the mouse and keyboard input based on the MouseEvent.

setKeyHandler(KeyHandler) - Method in interface org.eclipse.gef.EditPartViewer

Sets the KeyHandler.

setKeyHandler(KeyHandler) - Method in class org.eclipse.gef.ui.parts.AbstractEditPartViewer

setLabel(String) - Method in class org.eclipse.gef.commands.Command

Sets the label used to describe this command to the User.

setLabel(String) - Method in class org.eclipse.gef.palette.PaletteEntry

Mutator method for label

setLabel(String) - Method in class org.eclipse.gef.ui.palette.customize.PaletteEntryFactory

Sets this factory's name.

setLargeIcon(ImageDescriptor) - Method in class org.eclipse.gef.palette.PaletteEntry

Mutator method for large icon

setLastButtonPressed(int) - Method in class org.eclipse.gef.requests.SelectionRequest

Sets the last mouse button that was pressed.

setLayoutConstraint(EditPart, IFigure, Object) - Method in class org.eclipse.gef.editparts.AbstractGraphicalEditPart

setLayoutConstraint(EditPart, IFigure, Object) - Method in interface org.eclipse.gef.GraphicalEditPart

Sets the specified constraint for a child's Figure on the content pane figure for this GraphicalEditPart.

setLayoutSetting(int) - Method in class org.eclipse.gef.ui.palette.DefaultPaletteViewerPreferences

setLayoutSetting(int) - Method in interface org.eclipse.gef.ui.palette.PaletteViewerPreferences

Sets the given setting as the current layout.

setLazyEnablementCalculation(boolean) - Method in class org.eclipse.gef.ui.actions.WorkbenchPartAction

Sets lazy calculation of the isEnabled property.

setLineHeight(int) - Method in class org.eclipse.gef.editparts.ViewportMouseWheelHelper

Sets the height (in pixels) that will be scrolled when line scrolling is requested.

setListener(EditPartListener) - Method in class org.eclipse.gef.editpolicies.LayoutEditPolicy

Sets the EditPartListener used to decorate new children.

setLocation(Point) - Method in class org.eclipse.gef.requests.ChangeBoundsRequest

Sets the location of the mouse pointer.

setLocation(Point) - Method in class org.eclipse.gef.requests.CreateRequest

Sets the location where the new object will be placed.

setLocation(Point) - Method in class org.eclipse.gef.requests.LocationRequest

Sets the current location.

setLocator(Locator) - Method in class org.eclipse.gef.handles.AbstractHandle

Sets the locator which position this handle.

setLocator(CellEditorLocator) - Method in class org.eclipse.gef.tools.DirectEditManager

Sets the CellEditorLocator used to place the cell editor in the correct location.

setMargin(Insets) - Method in class org.eclipse.gef.editparts.ViewportExposeHelper

Sets the amount of margin to be left around the descendant being exposed.

setMarqueeBehavior(int) - Method in class org.eclipse.gef.tools.MarqueeSelectionTool

Sets the type of parts that this tool will select.

setMaximumFrameCount(int) - Method in class org.eclipse.gef.editparts.ViewportExposeHelper

Sets the maximumFrameCount.

setMinimumFrameCount(int) - Method in class org.eclipse.gef.editparts.ViewportExposeHelper

Sets the minimumFrameCount.

setModel(Object) - Method in interface org.eclipse.gef.EditPart

Sets the model.

setModel(Object) - Method in class org.eclipse.gef.editparts.AbstractEditPart

Set the primary model object that this EditPart represents.

setModifiers(int) - Method in class org.eclipse.gef.requests.SelectionRequest

Sets the statemask for this request.

setMouseButton(int, boolean) - Method in class org.eclipse.gef.tools.AbstractTool.Input

Sets mouse button # which to be pressed if state is true.

setMouseLocation(Point) - Method in class org.eclipse.gef.requests.ChangeBoundsRequest

Deprecated. Use ChangeBoundsRequest.setLocation(Point)

setMouseLocation(int, int) - Method in class org.eclipse.gef.tools.AbstractTool.Input

Sets the current location of the mouse

setMoveDelta(Point) - Method in class org.eclipse.gef.requests.ChangeBoundsRequest

Sets the move delta.

setMovingStartAnchor(boolean) - Method in class org.eclipse.gef.editpolicies.FeedbackHelper

Sets if moving start of connection.

setObject(Object) - Method in class org.eclipse.gef.dnd.SimpleObjectTransfer

Sets the Object.

setOrigin(Point) - Method in class org.eclipse.gef.editparts.GridLayer

Sets the origin of the grid.

setOverrideCursor(Cursor) - Method in class org.eclipse.gef.ui.parts.DomainEventDispatcher

Sets the override cursor.

setOwner(GraphicalEditPart) - Method in class org.eclipse.gef.handles.AbstractHandle

Sets the owner editpart associated with this handle.

setPageContainer(EntryPageContainer) - Method in class org.eclipse.gef.ui.palette.customize.DefaultEntryPage

setPageContainer(EntryPageContainer) - Method in interface org.eclipse.gef.ui.palette.customize.EntryPage

Sets the page container for this page.

setPageHeight(int) - Method in class org.eclipse.gef.editparts.ViewportMouseWheelHelper

Sets the height (in pixels) that will be scrolled when page scrolling is requested.

setPaletteRoot(PaletteRoot) - Method in class org.eclipse.gef.EditDomain

Sets the PalatteRoot for this EditDomain.

setPaletteRoot(PaletteRoot) - Method in class org.eclipse.gef.ui.palette.PaletteViewer

Sets the root for this palette.

setPaletteState(int) - Method in interface org.eclipse.gef.ui.palette.FlyoutPaletteComposite.FlyoutPreferences

This method is invoked when the flyout palette's state is changed (the new state becomes the default).

setPaletteViewer(PaletteViewer) - Method in class org.eclipse.gef.EditDomain

Sets the PaletteViewer for this EditDomain

setPaletteViewer(PaletteViewer) - Method in class org.eclipse.gef.ui.parts.GraphicalEditorWithPalette

Sets the palette viewer

setPaletteViewerPreferences(PaletteViewerPreferences) - Method in class org.eclipse.gef.ui.palette.PaletteViewer

This palette will use the given PaletteViewerPreferences to store all its preferences.

setPaletteWidth(int) - Method in interface org.eclipse.gef.ui.palette.FlyoutPaletteComposite.FlyoutPreferences

This method is invoked when the flyout palette is resized.

setParent(EditPart) - Method in interface org.eclipse.gef.EditPart

Sets the parent.

setParent(EditPart) - Method in class org.eclipse.gef.editparts.AbstractConnectionEditPart

Extended to implement automatic addNotify and removeNotify handling.

setParent(EditPart) - Method in class org.eclipse.gef.editparts.AbstractEditPart

Sets the parent EditPart.

setParent(KeyHandler) - Method in class org.eclipse.gef.KeyHandler

Sets a parent KeyHandler to which this KeyHandler will forward un-consumed KeyEvents.

setParent(PaletteContainer) - Method in class org.eclipse.gef.palette.PaletteEntry

Sets the parent of this entry

setPrimary(boolean) - Method in class org.eclipse.gef.handles.CornerTriangleBorder

Deprecated. Sets this border as primary if isPrimary is true.

setProperties(Map) - Method in interface org.eclipse.gef.Tool

This method can be invoked to set any properties of this tool.

setProperties(Map) - Method in class org.eclipse.gef.tools.AbstractTool

An example is AbstractTool.PROPERTY_UNLOAD_WHEN_FINISHED -> Boolean.

setProperty(String, Object) - Method in interface org.eclipse.gef.EditPartViewer

Sets a property on this viewer.

setProperty(String, Object) - Method in class org.eclipse.gef.ui.parts.AbstractEditPartViewer

SetPropertyValueCommand - Class in org.eclipse.gef.ui.properties

A command used to set or reset the value of a property.

SetPropertyValueCommand(String, IPropertySource, Object, Object) - Constructor for class org.eclipse.gef.ui.properties.SetPropertyValueCommand

Constructs a new SetPropertyValueCommand.

setReference(IFigure) - Method in class org.eclipse.gef.handles.MoveHandleLocator

Sets the reference figure.

setResizeDirection(int) - Method in class org.eclipse.gef.requests.ChangeBoundsRequest

Sets the direction the figure is being resized.

setResizeDirections(int) - Method in class org.eclipse.gef.editpolicies.ResizableEditPolicy

Sets the directions in which handles should allow resizing.

setRootEditPart(RootEditPart) - Method in interface org.eclipse.gef.EditPartViewer

Sets the root of this viewer.

setRootEditPart(RootEditPart) - Method in class org.eclipse.gef.ui.parts.AbstractEditPartViewer

setRootEditPart(RootEditPart) - Method in class org.eclipse.gef.ui.parts.GraphicalViewerImpl

setRootFigure(IFigure) - Method in class org.eclipse.gef.ui.parts.GraphicalViewerImpl

Deprecated. This method should no longer be used.

setRouteEventsToEditDomain(boolean) - Method in interface org.eclipse.gef.EditPartViewer

Turns on/off the routing of events directly to the Editor.

setRouteEventsToEditDomain(boolean) - Method in class org.eclipse.gef.ui.parts.AbstractEditPartViewer

setRouteEventsToEditDomain(boolean) - Method in class org.eclipse.gef.ui.parts.GraphicalViewerImpl

setRouteEventsToEditor(boolean) - Method in class org.eclipse.gef.ui.parts.DomainEventDispatcher

Sets whether events should go directly to the edit domain.

setSelected(int) - Method in interface org.eclipse.gef.EditPart

Sets the selected state property to reflect the selection in the EditPartViewer.

setSelected(int) - Method in class org.eclipse.gef.editparts.AbstractEditPart

Sets the selected state for this EditPart, which may be one of: EditPart.SELECTED_PRIMARY EditPart.SELECTED EditPart.SELECTED_NONE.

setSelectedState(int) - Method in class org.eclipse.gef.editpolicies.SelectionEditPolicy

Sets the internal selection value.

setSelection(ISelection) - Method in class org.eclipse.gef.SelectionManager

Sets the selection.

setSelection(ISelection) - Method in class org.eclipse.gef.ui.actions.SelectionAction

Sets the current selection and calls on subclasses to handle the selectionChanged event.

setSelection(ISelection) - Method in class org.eclipse.gef.ui.parts.AbstractEditPartViewer

Sets the selection to the given selection and fires selection changed.

setSelection(ISelection) - Method in class org.eclipse.gef.ui.parts.ContentOutlinePage

setSelectionManager(SelectionManager) - Method in interface org.eclipse.gef.EditPartViewer

Sets the selection manager for this viewer.

setSelectionManager(SelectionManager) - Method in class org.eclipse.gef.ui.parts.AbstractEditPartViewer

setSelectionProvider(ISelectionProvider) - Method in class org.eclipse.gef.ui.actions.SelectionAction

May be used to provide an alternative selection source other than the workbench's selection service.

setShowDefaultIcon(boolean) - Method in class org.eclipse.gef.palette.PaletteDrawer

Should the default icon be shown for this drawer if no icon is set?

setSize(Dimension) - Method in class org.eclipse.gef.requests.CreateRequest

Sets the size of the new object.

setSizeDelta(Dimension) - Method in class org.eclipse.gef.requests.ChangeBoundsRequest

Sets the size delta.

setSmallIcon(ImageDescriptor) - Method in class org.eclipse.gef.palette.PaletteEntry

Mutator method for small icon

setSnapToEnabled(boolean) - Method in class org.eclipse.gef.requests.ChangeBoundsRequest

Used to set whether snap-to is being performed.

setSnapToEnabled(boolean) - Method in class org.eclipse.gef.requests.CreateRequest

Used to set whether snap-to is being performed.

setSource(EditPart) - Method in interface org.eclipse.gef.ConnectionEditPart

Sets the source of this connection.

setSource(EditPart) - Method in class org.eclipse.gef.editparts.AbstractConnectionEditPart

Sets the source EditPart of this connection.

setSource(ConnectionEditPart) - Method in class org.eclipse.gef.requests.BendpointRequest

Sets the ConnectionEditPart the bendpoint belongs to.

setSourceEditPart(EditPart) - Method in class org.eclipse.gef.requests.CreateConnectionRequest

Sets the source of the Connection to the given EditPart.

setSourceEditPart(EditPart) - Method in class org.eclipse.gef.tools.SelectEditPartTracker

Sets the source edit part.

setSpacing(Dimension) - Method in class org.eclipse.gef.editparts.GridLayer

Sets the horizontal and vertical spacing of the grid.

setStartCommand(Command) - Method in class org.eclipse.gef.requests.CreateConnectionRequest

Sets the start command.

setStartLocation(Point) - Method in class org.eclipse.gef.tools.AbstractTool

Sets the start mouse location, typically for a drag operation.

setState(int) - Method in class org.eclipse.gef.tools.AbstractTool

Sets the tools state.

setState(int) - Method in class org.eclipse.gef.tools.DragEditPartsTracker

Extended to activate cloning and to update the captured source dimensions when applicable.

setSupportedLayoutModes(int[]) - Method in class org.eclipse.gef.ui.palette.DefaultPaletteViewerPreferences

NOTE: Restricting the layout modes here does not in any way restrict those values from being stored in the preference store.

setSupportedLayoutModes(int[]) - Method in interface org.eclipse.gef.ui.palette.PaletteViewerPreferences

The client can restrict the modes that the palette supports using this method.

setTarget(EditPart) - Method in interface org.eclipse.gef.ConnectionEditPart

Sets thetarget of this connection.

setTarget(EditPart) - Method in class org.eclipse.gef.editparts.AbstractConnectionEditPart

Sets the target EditPart of this connection.

setTargetEditPart(EditPart) - Method in class org.eclipse.gef.dnd.AbstractTransferDropTargetListener

Sets the target EditPart.

setTargetEditPart(EditPart) - Method in class org.eclipse.gef.requests.CreateConnectionRequest

Sets the target of the Connection to the given EditPart.

setTargetEditPart(EditPart) - Method in class org.eclipse.gef.requests.ReconnectRequest

Sets the target edit part that the connection should be connected to.

setTargetEditPart(EditPart) - Method in interface org.eclipse.gef.requests.TargetRequest

Sets the target EditPart.

setTargetEditPart(EditPart) - Method in class org.eclipse.gef.tools.DragEditPartsTracker

Extended to update the current snap-to strategy.

setTargetEditPart(EditPart) - Method in class org.eclipse.gef.tools.TargetingTool

Sets the target editpart.

setTargetRequest(Request) - Method in class org.eclipse.gef.tools.TargetingTool

Sets the target request.

setTemplate(Object) - Method in class org.eclipse.gef.dnd.TemplateTransfer

Sets the template Object.

setTemplate(Object) - Method in class org.eclipse.gef.palette.CombinedTemplateCreationEntry

Sets the template.

setTemplate(Object) - Method in class org.eclipse.gef.palette.PaletteTemplateEntry

Sets the template object to the given value

setThreshold(double) - Method in class org.eclipse.gef.SnapToGeometry

Set the sensitivity of the snapping.

setThreshold(double) - Method in class org.eclipse.gef.SnapToGuides

Set the sensitivity of the snapping.

settings - Variable in class org.eclipse.gef.ui.palette.customize.PaletteSettingsDialog

A HashMap to cache the various settings displayed in this dialog

SETTINGS_COLUMNS_VIEW_LABEL - Static variable in class org.eclipse.gef.ui.palette.PaletteMessages

The String "&Columns"

SETTINGS_DEFAULT_FONT - Static variable in class org.eclipse.gef.ui.palette.PaletteMessages

The String "&Restore Default"

SETTINGS_DETAILS_VIEW_LABEL - Static variable in class org.eclipse.gef.ui.palette.PaletteMessages

The String "&Details"

SETTINGS_DIALOG_TITLE - Static variable in class org.eclipse.gef.ui.palette.PaletteMessages

The String "Palette Settings"

SETTINGS_DRAWER_OPTIONS_TITLE - Static variable in class org.eclipse.gef.ui.palette.PaletteMessages

The String "Drawer Options"

SETTINGS_FONT_CHANGE - Static variable in class org.eclipse.gef.ui.palette.PaletteMessages

The String "C&hange..."

SETTINGS_FONT_CURRENT - Static variable in class org.eclipse.gef.ui.palette.PaletteMessages

The String "Font: "

SETTINGS_FONT_TITLE - Static variable in class org.eclipse.gef.ui.palette.PaletteMessages

The String "Font"

SETTINGS_ICONS_VIEW_LABEL - Static variable in class org.eclipse.gef.ui.palette.PaletteMessages

The String "&Icons only"

SETTINGS_ICONS_VIEW_LABEL_CAPS - Static variable in class org.eclipse.gef.ui.palette.PaletteMessages

The String "&Icons Only"

SETTINGS_LAYOUT_COLUMNS_OVERRIDE_WIDTH - Static variable in class org.eclipse.gef.ui.palette.PaletteMessages

The String "&Override default column width settings"

SETTINGS_LAYOUT_COLUMNS_WIDTH - Static variable in class org.eclipse.gef.ui.palette.PaletteMessages

The String "Colu&mn width (in pixels): "

SETTINGS_LAYOUT_OPTIONS_TITLE - Static variable in class org.eclipse.gef.ui.palette.PaletteMessages

The String "Layout options"

SETTINGS_LAYOUT_TITLE - Static variable in class org.eclipse.gef.ui.palette.PaletteMessages

The String "Layout: "

SETTINGS_LIST_VIEW_LABEL - Static variable in class org.eclipse.gef.ui.palette.PaletteMessages

The String "&List"

SETTINGS_OPTIONS_COLUMNS - Static variable in class org.eclipse.gef.ui.palette.PaletteMessages

The String "Columns layout options"

SETTINGS_OPTIONS_DETAILS - Static variable in class org.eclipse.gef.ui.palette.PaletteMessages

The String "Details layout options"

SETTINGS_OPTIONS_ICONS_ONLY - Static variable in class org.eclipse.gef.ui.palette.PaletteMessages

The String " layout options"

SETTINGS_OPTIONS_LIST - Static variable in class org.eclipse.gef.ui.palette.PaletteMessages

The String "List layout options"

SETTINGS_USE_LARGE_ICONS_LABEL - Static variable in class org.eclipse.gef.ui.palette.PaletteMessages

The String "&Use large icons"

SETTINGS_USE_LARGE_ICONS_LABEL_CAPS - Static variable in class org.eclipse.gef.ui.palette.PaletteMessages

The String "&Use Large Icons"

SETTINGS_WORKBENCH_FONT_LABEL - Static variable in class org.eclipse.gef.ui.palette.PaletteMessages

The String ""

SettingsAction - Class in org.eclipse.gef.ui.palette

An action to launch the Settings dialog for the given palette.

SettingsAction(PaletteViewer) - Constructor for class org.eclipse.gef.ui.palette.SettingsAction

Constructor

setToolCapture() - Method in class org.eclipse.gef.tools.AbstractTool

Sets tool capture.

setToolClass(Class) - Method in class org.eclipse.gef.palette.ToolEntry

Sets the type of tool to be created.

setToolProperty(Object, Object) - Method in class org.eclipse.gef.palette.ToolEntry

Clients can use this method to configure the associated tool without having to sub-class.

setTransfer(Transfer) - Method in class org.eclipse.gef.dnd.AbstractTransferDragSourceListener

Sets the Transfer for this listener.

setTransfer(Transfer) - Method in class org.eclipse.gef.dnd.AbstractTransferDropTargetListener

Sets the Tranfer type that this listener can handle.

setType(Object) - Method in class org.eclipse.gef.palette.PaletteEntry

Mutator method for type

setType(Object) - Method in class org.eclipse.gef.Request

Sets the type of the Request.

setType(Object) - Method in class org.eclipse.gef.tools.ConnectionBendpointTracker

Sets the type of bendpoint drag being performed.

setUIMultiplier(double) - Method in class org.eclipse.gef.editparts.ZoomManager

Sets the UI multiplier.

setUndoLimit(int) - Method in class org.eclipse.gef.commands.CommandStack

Sets the undo limit.

setUnit(int) - Method in class org.eclipse.gef.rulers.RulerProvider

This method will be invoked when the user requests that the ruler display a different measurement.

setUnloadWhenFinished(boolean) - Method in class org.eclipse.gef.tools.AbstractTool

Setting this to true will cause the tool to be unloaded after one operation has completed.

setUseLargeIcons(int, boolean) - Method in class org.eclipse.gef.ui.palette.DefaultPaletteViewerPreferences

setUseLargeIcons(int, boolean) - Method in interface org.eclipse.gef.ui.palette.PaletteViewerPreferences

Sets the "Use Large Icons" option for the given layout.

setUserModificationPermission(int) - Method in class org.eclipse.gef.palette.PaletteEntry

Permissions are not checked before making modifications.

setViewer(EditPartViewer) - Method in class org.eclipse.gef.ContextMenuProvider

Sets the editpart viewer.

setViewer(EditPartViewer) - Method in class org.eclipse.gef.dnd.AbstractTransferDragSourceListener

Sets the EditPartViewer for this listener.

setViewer(EditPartViewer) - Method in class org.eclipse.gef.dnd.AbstractTransferDropTargetListener

Sets the EditPartViewer.

setViewer(EditPartViewer) - Method in class org.eclipse.gef.editparts.GraphicalRootEditPart

Deprecated.

setViewer(EditPartViewer) - Method in class org.eclipse.gef.editparts.RootTreeEditPart

setViewer(EditPartViewer) - Method in class org.eclipse.gef.editparts.SimpleRootEditPart

setViewer(GraphicalViewer) - Method in class org.eclipse.gef.print.PrintGraphicalViewerOperation

Sets the viewer.

setViewer(EditPartViewer) - Method in interface org.eclipse.gef.RootEditPart

Sets the root's EditPartViewer.

setViewer(EditPartViewer) - Method in interface org.eclipse.gef.Tool

Called to set the current Viewer receiving events.

setViewer(EditPartViewer) - Method in class org.eclipse.gef.tools.AbstractTool

Sets the active EditPartViewer.

setViewer(EditPartViewer) - Method in class org.eclipse.gef.tools.MarqueeSelectionTool

setViewLocation(Point) - Method in class org.eclipse.gef.editparts.ZoomManager

Sets the Viewport's view associated with this ZoomManager to the passed Point

setVisible(boolean) - Method in class org.eclipse.gef.palette.PaletteEntry

Makes this entry visible or invisible.

setWidget(Widget) - Method in class org.eclipse.gef.editparts.AbstractTreeEditPart

Sets the AbstractTreeEditPart.widget.

setWidget(Widget) - Method in class org.eclipse.gef.editparts.RootTreeEditPart

Called by TreeViewer to set the Tree into the root.

setWidget(Widget) - Method in interface org.eclipse.gef.TreeEditPart

Set's the EditPart's widget.

setWidgetImage(Image) - Method in class org.eclipse.gef.editparts.AbstractTreeEditPart

Sets a specified Image into the widget iff it is a TreeItem.

setWidgetText(String) - Method in class org.eclipse.gef.editparts.AbstractTreeEditPart

Sets a specified String into the widget iff it is a TreeItem.

setWorkbenchPart(IWorkbenchPart) - Method in class org.eclipse.gef.ui.actions.WorkbenchPartAction

Sets the workbench part.

setXyLayout(XYLayout) - Method in class org.eclipse.gef.editpolicies.XYLayoutEditPolicy

setZoom(double) - Method in class org.eclipse.gef.editparts.ZoomManager

Sets the zoom level to the given value.

setZoomAnimationStyle(int) - Method in class org.eclipse.gef.editparts.ZoomManager

Sets which zoom methods get animated.

setZoomAsText(String) - Method in class org.eclipse.gef.editparts.ZoomManager

Sets zoom to the passed string.

setZoomLevelContributions(List) - Method in class org.eclipse.gef.editparts.ZoomManager

Sets the list of zoom level contributions (as strings).

setZoomLevels(double[]) - Method in class org.eclipse.gef.editparts.ZoomManager

Sets the zoomLevels.

setZoomManager(ZoomManager) - Method in class org.eclipse.gef.ui.actions.ZoomComboContributionItem

Sets the ZoomManager

SharedCursors - Class in org.eclipse.gef

A shared collection of Cursors.

SharedCursors() - Constructor for class org.eclipse.gef.SharedCursors

SharedImages - Class in org.eclipse.gef

A class containing shared Images and ImageDescriptors for use by clients.

SharedImages() - Constructor for class org.eclipse.gef.SharedImages

SharedMessages - Class in org.eclipse.gef

This class contains UI strings (translated, if available) that clients can use.

SharedMessages() - Constructor for class org.eclipse.gef.SharedMessages

show() - Method in class org.eclipse.gef.tools.DirectEditManager

Shows the cell editor when direct edit is started.

showChangeBoundsFeedback(ChangeBoundsRequest) - Method in class org.eclipse.gef.editpolicies.NonResizableEditPolicy

Shows or updates feedback for a change bounds request.

showConnectionMoveFeedback(ReconnectRequest) - Method in class org.eclipse.gef.editpolicies.ConnectionEndpointEditPolicy

Shows or updates connection move feedback.

showCreateBendpointFeedback(BendpointRequest) - Method in class org.eclipse.gef.editpolicies.BendpointEditPolicy

Shows feedback when a bendpoint is being created.

showCreationFeedback(CreateConnectionRequest) - Method in class org.eclipse.gef.editpolicies.GraphicalNodeEditPolicy

Shows feedback during a creation.

showCurrentEditValue(DirectEditRequest) - Method in class org.eclipse.gef.editpolicies.DirectEditPolicy

Override to show the current direct edit value in the host's Figure.

showDefaultIcon() - Method in class org.eclipse.gef.palette.PaletteDrawer

Should the default icon be shown for this drawer if no icon is set?

showDeleteBendpointFeedback(BendpointRequest) - Method in class org.eclipse.gef.editpolicies.BendpointEditPolicy

Shows feedback when a bendpoint is being deleted.

showDirectEditFeedback(DirectEditRequest) - Method in class org.eclipse.gef.editpolicies.DirectEditPolicy

Pushes the original edit value if necessary, and shows feedback.

showFeedback() - Method in class org.eclipse.gef.editpolicies.ScrollableSelectionFeedbackEditPolicy

Creates feedback figures for all node figures nested within the host figure's viewport, as well as for all incoming and outgoing connections of these nodes.

showFeedback() - Method in class org.eclipse.gef.tools.DirectEditManager

Asks the source edit part to show source feedback.

showFocus() - Method in class org.eclipse.gef.editpolicies.ConnectionEndpointEditPolicy

Shows focus around the connection.

showFocus() - Method in class org.eclipse.gef.editpolicies.NonResizableEditPolicy

Shows a focus rectangle around the host's figure.

showFocus() - Method in class org.eclipse.gef.editpolicies.SelectionEditPolicy

Override to show focus.

showHoverFeedback() - Method in class org.eclipse.gef.tools.SelectionTool

Asks the target edit part (if there is one) to show hover feedback via EditPart.showTargetFeedback(Request) with a hover request.

showLayoutOptionsPage(Control) - Method in class org.eclipse.gef.ui.palette.customize.PaletteSettingsDialog

This helper method is mainly a result of code-factoring.

showLayoutTargetFeedback(Request) - Method in class org.eclipse.gef.editpolicies.FlowLayoutEditPolicy

Shows an insertion line if there is one or more current children.

showLayoutTargetFeedback(Request) - Method in class org.eclipse.gef.editpolicies.LayoutEditPolicy

Shows target layout feedback.

showMoveBendpointFeedback(BendpointRequest) - Method in class org.eclipse.gef.editpolicies.BendpointEditPolicy

Shows feedback when a bendpoint is being moved.

showPrimarySelection() - Method in class org.eclipse.gef.editpolicies.SelectionEditPolicy

Calls SelectionEditPolicy.showSelection() by default.

showProblem(String) - Method in interface org.eclipse.gef.ui.palette.customize.EntryPageContainer

Shows the error to the user.

showProblem(String) - Method in class org.eclipse.gef.ui.palette.customize.PaletteCustomizerDialog

This method should be invoked by EntryPages when there is an error.

showSelection() - Method in class org.eclipse.gef.editpolicies.ScrollableSelectionFeedbackEditPolicy

showSelection() - Method in class org.eclipse.gef.editpolicies.SelectionEditPolicy

Override to show selection

showSelection() - Method in class org.eclipse.gef.editpolicies.SelectionHandlesEditPolicy

Implemented to add the selection handles

showSizeOnDropFeedback(CreateRequest) - Method in class org.eclipse.gef.editpolicies.LayoutEditPolicy

Shows size-on-drop feedback during creation.

showSizeOnDropFeedback(CreateRequest) - Method in class org.eclipse.gef.editpolicies.XYLayoutEditPolicy

showSourceFeedback(Request) - Method in interface org.eclipse.gef.EditPart

Shows or updates source feedback for the given request.

showSourceFeedback(Request) - Method in class org.eclipse.gef.editparts.AbstractEditPart

Shows or updates source feedback for the given Request.

showSourceFeedback(Request) - Method in class org.eclipse.gef.editpolicies.AbstractEditPolicy

Does nothing by default.

showSourceFeedback(Request) - Method in class org.eclipse.gef.editpolicies.BendpointEditPolicy

Shows feedback when appropriate.

showSourceFeedback(Request) - Method in class org.eclipse.gef.editpolicies.ConnectionEndpointEditPolicy

showSourceFeedback(Request) - Method in class org.eclipse.gef.editpolicies.DirectEditPolicy

showSourceFeedback(Request) - Method in class org.eclipse.gef.editpolicies.GraphicalNodeEditPolicy

calls GraphicalNodeEditPolicy.showCreationFeedback(CreateConnectionRequest) when appropriate.

showSourceFeedback(Request) - Method in class org.eclipse.gef.editpolicies.NonResizableEditPolicy

Calls other methods as appropriate.

showSourceFeedback(Request) - Method in class org.eclipse.gef.editpolicies.ResizableEditPolicy

showSourceFeedback(Request) - Method in interface org.eclipse.gef.EditPolicy

Shows or updates source feedback for the specified Request.

showSourceFeedback() - Method in class org.eclipse.gef.tools.AbstractConnectionCreationTool

Sends a show feedback request to the source editpart and sets the feedback flag.

showSourceFeedback() - Method in class org.eclipse.gef.tools.ConnectionEndpointTracker

Asks the ConnectionEditPart to show source feedback.

showSourceFeedback() - Method in class org.eclipse.gef.tools.DragEditPartsTracker

Asks the edit parts in the operation set to show source feedback.

showSourceFeedback() - Method in class org.eclipse.gef.tools.SimpleDragTracker

Show the source drag feedback for the drag occurring within the viewer.

showTargetConnectionFeedback(DropRequest) - Method in class org.eclipse.gef.editpolicies.GraphicalNodeEditPolicy

Override to show target connection feedback.

showTargetFeedback() - Method in class org.eclipse.gef.dnd.AbstractTransferDropTargetListener

Asks the target EditPart to show target feedback if it is not null.

showTargetFeedback(Request) - Method in interface org.eclipse.gef.EditPart

Shows or updates target feedback for the given request.

showTargetFeedback(Request) - Method in class org.eclipse.gef.editparts.AbstractEditPart

Shows or updates target feedback for the given Request.

showTargetFeedback(Request) - Method in class org.eclipse.gef.editpolicies.AbstractEditPolicy

Does nothing by default.

showTargetFeedback(Request) - Method in class org.eclipse.gef.editpolicies.GraphicalNodeEditPolicy

Calls GraphicalNodeEditPolicy.showTargetConnectionFeedback(DropRequest) when appropriate.

showTargetFeedback(Request) - Method in class org.eclipse.gef.editpolicies.LayoutEditPolicy

Factors feedback requests into two more specific methods.

showTargetFeedback(Request) - Method in class org.eclipse.gef.editpolicies.SnapFeedbackPolicy

showTargetFeedback(Request) - Method in class org.eclipse.gef.editpolicies.TreeContainerEditPolicy

showTargetFeedback(Request) - Method in interface org.eclipse.gef.EditPolicy

Shows or updates target feedback for the specified Request.

showTargetFeedback() - Method in class org.eclipse.gef.tools.ResizeTracker

This method is invoked as the drag is happening.

showTargetFeedback() - Method in class org.eclipse.gef.tools.TargetingTool

Asks the target editpart to show target feedback and sets the target feedback flag.

SimpleDragTracker - Class in org.eclipse.gef.tools

A simple drag tracker implementation that does not perform targeting.

SimpleDragTracker() - Constructor for class org.eclipse.gef.tools.SimpleDragTracker

Null constructor.

SimpleFactory - Class in org.eclipse.gef.requests

A simple CreationFactory that takes a Class in the constructor and creates a new instance of this Class in SimpleFactory.getNewObject().

SimpleFactory(Class) - Constructor for class org.eclipse.gef.requests.SimpleFactory

Creates a SimpleFactory.

SimpleObjectTransfer - Class in org.eclipse.gef.dnd

Holds on to the object being transferred in a field so that DropTargetListeners can know what's being dragged before the drop occurs.

SimpleObjectTransfer() - Constructor for class org.eclipse.gef.dnd.SimpleObjectTransfer

SimpleRootEditPart - Class in org.eclipse.gef.editparts

Default implementation of RootEditPart for GraphicalViewers.

SimpleRootEditPart() - Constructor for class org.eclipse.gef.editparts.SimpleRootEditPart

SINGLETON - Static variable in class org.eclipse.gef.MouseWheelZoomHandler

The Singleton

size() - Method in class org.eclipse.gef.commands.CompoundCommand

SnapFeedbackPolicy - Class in org.eclipse.gef.editpolicies

An EditPolicy that is used to show snap feedback for guides (red lines) and geometry (blue lines).

SnapFeedbackPolicy() - Constructor for class org.eclipse.gef.editpolicies.SnapFeedbackPolicy

snapPoint(Request, int, PrecisionPoint, PrecisionPoint) - Method in class org.eclipse.gef.SnapToHelper

Applies a snapping correction to the given result.

snapPoint(Request, int, PrecisionRectangle[], PrecisionPoint) - Method in class org.eclipse.gef.SnapToHelper

A convenience method for snapping a Point based on an array of rectangles.

snapPoint(ChangeBoundsRequest) - Method in class org.eclipse.gef.tools.DragEditPartsTracker

This method can be overridden by clients to customize the snapping behavior.

snapRectangle(Request, int, PrecisionRectangle, PrecisionRectangle) - Method in class org.eclipse.gef.CompoundSnapToHelper

snapRectangle(Request, int, PrecisionRectangle, PrecisionRectangle) - Method in class org.eclipse.gef.SnapToGeometry

snapRectangle(Request, int, PrecisionRectangle, PrecisionRectangle) - Method in class org.eclipse.gef.SnapToGrid

snapRectangle(Request, int, PrecisionRectangle, PrecisionRectangle) - Method in class org.eclipse.gef.SnapToGuides

snapRectangle(Request, int, PrecisionRectangle[], PrecisionRectangle) - Method in class org.eclipse.gef.SnapToHelper

A convenience method for snapping a Rectangle based on one or more rectangles.

snapRectangle(Request, int, PrecisionRectangle, PrecisionRectangle) - Method in class org.eclipse.gef.SnapToHelper

Applies a snap correction to a Rectangle based on a given Rectangle.

SnapToGeometry - Class in org.eclipse.gef

A temporary helper used to perform snapping to existing elements.

SnapToGeometry(GraphicalEditPart) - Constructor for class org.eclipse.gef.SnapToGeometry

Constructs a helper that will use the given part as its basis for snapping.

SnapToGeometry.Entry - Class in org.eclipse.gef

A vertical or horizontal snapping point. since 3.0

SnapToGeometry.Entry(int, int) - Constructor for class org.eclipse.gef.SnapToGeometry.Entry

Constructs a new entry of the given type and location.

SnapToGrid - Class in org.eclipse.gef

A helper used to perform snapping to a grid, which is specified on the graphical viewer via the various properties defined in this class.

SnapToGrid(GraphicalEditPart) - Constructor for class org.eclipse.gef.SnapToGrid

Constructs a gridded snap helper on the given editpart.

SnapToGuides - Class in org.eclipse.gef

A helper used to perform snapping to guides.

SnapToGuides(GraphicalEditPart) - Constructor for class org.eclipse.gef.SnapToGuides

Constructs a new snap-to-guides helper using the given container as the basis.

SnapToHelper - Class in org.eclipse.gef

A helper used temporarily by Tools for snapping certain mouse interactions.

SnapToHelper() - Constructor for class org.eclipse.gef.SnapToHelper

sourceConnectionAdded(ConnectionEditPart, int) - Method in interface org.eclipse.gef.NodeListener

Called after the connection has been added to its source node.

sourceConnections - Variable in class org.eclipse.gef.editparts.AbstractGraphicalEditPart

List of source ConnectionEditParts

SquareHandle - Class in org.eclipse.gef.handles

A small square handle approximately 7x7 pixels in size, that is either black or white.

SquareHandle() - Constructor for class org.eclipse.gef.handles.SquareHandle

Null constructor

SquareHandle(GraphicalEditPart, Locator) - Constructor for class org.eclipse.gef.handles.SquareHandle

Creates a SquareHandle for the given GraphicalEditPart with the given Locator.

SquareHandle(GraphicalEditPart, Locator, Cursor) - Constructor for class org.eclipse.gef.handles.SquareHandle

Creates a SquareHandle for the given GraphicalEditPart with the given Cursor using the given Locator.

StackAction - Class in org.eclipse.gef.ui.actions

Superclass for actions needing access to the stack.

StackAction(IWorkbenchPart) - Constructor for class org.eclipse.gef.ui.actions.StackAction

Creates a StackAction and associates it with the given editor.

stackChanged(CommandStackEvent) - Method in interface org.eclipse.gef.commands.CommandStackEventListener

Sent when an event occurs on the command stack.

STATE_ACCESSIBLE_DRAG - Static variable in class org.eclipse.gef.tools.AbstractTool

The state indicating that the keyboard is being used to perform a drag that is normally done using the mouse.

STATE_ACCESSIBLE_DRAG_IN_PROGRESS - Static variable in class org.eclipse.gef.tools.AbstractTool

The state indicating that a keyboard drag is in progress.

STATE_COLLAPSED - Static variable in class org.eclipse.gef.ui.palette.FlyoutPaletteComposite

One of the two possible initial states of the flyout palette.

STATE_CONNECTION_STARTED - Static variable in class org.eclipse.gef.tools.AbstractConnectionCreationTool

The state which indicates that the connection creation has begun.

STATE_DRAG - Static variable in class org.eclipse.gef.tools.AbstractTool

The state indicating that one or more buttons are pressed, but the user has not moved past the drag threshold.

STATE_DRAG_IN_PROGRESS - Static variable in class org.eclipse.gef.tools.AbstractTool

The state indicating that the drag detection theshold has been passed, and a drag is in progress.

STATE_INITIAL - Static variable in class org.eclipse.gef.tools.AbstractTool

The first state that a tool is in.

STATE_INVALID - Static variable in class org.eclipse.gef.tools.AbstractTool

The state indicating that an input event has invalidated the interaction.

STATE_PINNED_OPEN - Static variable in class org.eclipse.gef.ui.palette.FlyoutPaletteComposite

One of the two possible initial states of the flyout palette.

STATE_TERMINAL - Static variable in class org.eclipse.gef.tools.AbstractTool

The final state for a tool to be in.

STATE_TRAVERSE_HANDLE - Static variable in class org.eclipse.gef.tools.SelectionTool

Traverse handle state

stateTransition(int, int) - Method in class org.eclipse.gef.tools.AbstractTool

Returns true if the give state transition succeeds.

step(Point) - Method in interface org.eclipse.gef.AutoexposeHelper

Performs the autoexpose and returns a hint indicating that the helper would like to remain active.

step(Point) - Method in class org.eclipse.gef.editparts.ViewportAutoexposeHelper

Returns true if the given point is outside the viewport or near its edge.

storeOldEditValue(DirectEditRequest) - Method in class org.eclipse.gef.editpolicies.DirectEditPolicy

Called to remember the old value before direct edit feedback begins.

StrokePointList - Class in org.eclipse.gef.editpolicies

StrokePointList() - Constructor for class org.eclipse.gef.editpolicies.StrokePointList